Installation manual

54
Various Settings
Reading Area Shot data
The Area Shot data that has been downloaded
from E-iSERV (web site) to a Memory Stick or
CD-R can be loaded into the main unit and saved
there.
The Menu Selection mode is activated.
The function mode is activated.
The selection item will be highlighted.
Area Shot setting mode is activated.
The media selection screen will
appears.
The panel opens automatically.
After the panel is closed, files in the
CD-R or Memory Stick are read.
If there are no correct files on the CD-
R or Memory Stick, "FILE ERROR" is
displayed.
1
Press the [CUSTOM] button for
more than one second.
2
Press the [SELECT] (Upper/ Lower)
button to select FUNC then press
the [ENTER] button.
3
Press the [SELECT] (Upper/ Lower)
button to select the AreaShot.
4
Press the [ENTER] button.
5
Press the [SELECT] (Upper/ Lower)
to select the Route Data.
6
Press the [ENTER] button.
7
Press the [SELECT] (Upper/
Lower) to select the DISC or MS.
8
Press the [ENTER] button.
9
Insert the Memory Stick or CD-R to
be used for read the Area Shot
data.
10
Press [ OPEN/EJECT] button to
close the panel.
11
Press the [SELECT] (Upper/
Lower) button to select the saving
file.