Installation manual

How to operate the Sound Adjustment Mode
71
XII
Displaying measurement results
After pushing the button, a 10-second
countdown begins. Leave the vehicle
during that time.
Pink noise will be output from the
speakers and measurement of the
frequency characteristics will start.
[Measuring] will appear on the display
while measurement is in progress.
When measurement is complete, the
measurement results will appear on
the display. You can adjust the volume
(by turning the [VOL] button) and
restart measurement while
measurement is in progress.
Press the button [6] once more to
cancel measurement.
The measurement result can be
referred to when adjusting parametric
equalizer.
To writing measurement results to
the Memory Stick
After pushing the button, a 10-second
countdown begins. Leave the vehicle
during that time.
Pink noise will be output from the
speakers and measurement of the
frequency characteristics will start.
[Measuring] will appear on the display
while measurement is in progress.
When measurement is complete, the
measurement results will appear on
the display. You can adjust the volume
(by turning the [VOL] button) and
restart measurement while
measurement is in progress.
Measurements can be written to a
memory stick and corrected
automatically using the E-iSERV
website.
Press the button [6] once more to
cancel measurement.
ATTENTION
• Sound quality data is written to Memory
Stick as follows.
2
Press the button [6] for less than
one second in PEQ screen.
3
Press the [CUSTOM] or [RTN]
button to exit sound adjustment
mode.
2
Insert the Memory Stick.
3
Press the button [6] for more than
one second.
4
Press the [CUSTOM] or [RTN]
button to exit sound adjustment
mode.
MSFTEN
SOUND
Adjustment mode
206 000.ftn
Three digit number
File extension
*
(a: 3 Way, d: 4 Speaker)