Installation manual

76
Various Settings
The front panel automatically opens.
When the button is pressed, the
setting item changes and the selected
item is highlighted.
The selected file is written to the
selected button.
When using a CD-R, the CD-R will
eject automatically when writing is
complete.
The display will return to the file
selection screen.
ATTENTION
<When using Memory Stick>
• Make a folders in the Memory Stick and
download the data adjust through E-iSERV
(web site) as shown below.
• The files that can be read by this main unit
are created automatically when you are
downloading from the E-iSERV sound effect
customizations.
<When using CD-R>
• The main unit can only import files from CD-
R that have been written with root
directories.
• Disc formats that may be used are as
follows:
• CD-ROM (MODE 1)
• CD-ROM (MODE2_FORM 1)
*CD-ROMs written in MODE2_FORM2 cannot
be read.
3
Press the [SELECT] (Upper/ Lower)
button to select media types (Disc
or Memory Stick).
4
Press the [ENTER] button.
5
Sound data adjusted by the E-
iSERV website can be downloaded
to a CD-R or a memory stick and
imported into the main unit.
6
Press the [SELECT] (Upper/ Lower)
button to select files.
7
Press the [ENTER] button.
8
Select from buttons [1] through [5],
and press and hold for 2 seconds
or more.
9
Press the [CUSTOM] or [RTN]
button to exit sound adjustment
mode.
MSFTEN
DATA
File extension
Two digit number
206 X 00 .eis
Adjustment mode
a: 3 Way d: 4 Speaker)
Adjustment pattern
(A: Flat tuning B: Bass range emphasis
C: Bass and Treble range emphasis
D: Midium range emphasis
0: No automatic parametric equalizer
correction)
User creation
Automatic creation
*
(
File extension
Two digit number
206
X 00 .eis
Adjustment mode
(a: 3 Way d: 4 speaker)
Adjustment pattern
(A: Flat tuning B: Bass range emphasis
C: Bass and Treble range emphasis
D: Midium range emphasis
0: No automatic parametric equalizer
correction)
Automatic creation
*