VIDEO INTERCOM SYSTEM USER MANUAL ES-V600 0
Contents Installation Guide ...................................................................................................................2 Features & Specifications......................................................................................................... 3 Descriptions of Monitor ............................................................................................................ 4 Descriptions of Doorbell/Camera..................................................................
Installation Guide 2
Features & Specifications Features Color 7-inch TFT LCD Screen Dual communication & Call Transfer Door Release Play TV/MUSIC Supports 2 cameras and 4 Monitors Monitor/Intercom/Broadcast Time/Volume/Brightness/Contrast/Color controls Hands free surface/flush mounted Technical Specifications: Display screen: color 7-inch TFT LCD Resolution: > 400 TV lines Scan frequency: Voltage: Video Input: 15,625Hz (H) 50Hz (V) 18VDC, 800mA (nominal) 75ς, 1Vp-p Power Consumption: 1.
Monitor D e s c r i p t i o n & B u t t o n M a p 4
Descriptions of Doorbell/Camera Model No.: ES-VC2 Surface-mounted, Zinc Housing, Color Camera, LED Night vision, Water-proof, Anti-sabotage, Name Plate 1. Camera Lens 2. Microphone 3. Indicator/Name Plate 4. Call button 5. Speaker 6. Night Vision LEDs 7. Screws Holes 8. 9.
Model No.: ES-VBIT & ES-VCIT Surface or Flush mounted, Aluminium Housing, Pinhole Color (VC1T) or B/W (VB1T) Camera, LED Night vision, Water-proof, Anti-sabotage 1. Microphone 2. Camera 3. IR LEDs 4. Doobell/Call button 5. Speaker 6. 7.
Wiring Diagrams and Schematics Connection block CN1: 18V (RED), GND (BLK):Terminals for Power Supply Input Connection block CN3: ,KEY1+(SDOOR1) (BRWN)、 VD1 (YEL)、 AU1 (W)、 GND (BLK) 、PWR1 (RED) Terminals for Power Unlock / Video / Audio / Ground / supply for the Doorbell / camera1. Connection block CN4: ,KEY1+(SDOOR1) (BRWN)、 VD1 (YEL)、 AU1 (W)、 GND (BLK)、PWR1 (RED) Terminals for Power Unlock / Video / Audio / Ground / supply for the Doorbell / camera1.
SYSTEM SCHEMATICS 2 Cameras, 2 Latches Monitors 8
WIRING DIAGRAMS 1 Camera, 1 Latch 1 Monitor 9
2 Cameras, 2 Latches 1 Monitor 10
2 Cameras, 2 Latches Multiple Monitors 11
INSTALLATION Single Monitor Installations Instruction: Refer to the appropriate wiring diagram above. Make sure you are using the right cables. Consider placement of item carefully with regard to user height and ability to reach controls. Run cable through bracket, then attach bracket to wall. Refer to appropriate wiring diagram above and connect cable(s) to unit. Install the indoor monitor on the wall as shown below.
Single Doorbell Camera Installations Instruction: Carefully consider positioning of the doorbell camera. We recommend testing the position with the indoor station prior to making permanent attachment. Consider lighting factors and position of sun, and color/brightness of the background behind the visitor. These factors will affect video quality. Remember some of these factors may change during the day or season.
Operation Guide 14
System Settings – See MONITOR DESCRIPTION & BUTTON MAP At standby mode, press and hold “Image capture” button for 5 seconds to get into the set-up mode as below. 1st line: Chime Duration Time 2nd line: Character Add: Enable/Disable “DOOR1/DOOR2” on monitor screen) 3rd line: Main/Sub Multiple Monitor set up HOLD button 6 on MAIN or SUB for 3 seconds At this point, pressing “Image capture” button will move to the next value until Intercom/Main menu. Use “◄►” (button 5) to select Main or Sub.
“DOOR NUM” setting can support maximum 2 doorbell channels for surveillance. With one doorbell only, you only need to set “DOOR NUM 1”. For two doorbells you need to set “DOOR NUM 2” to activate both 2 doorbell cameras. E.g. Press “◄►” button to modify number. Press “Image capture” button for 2 seconds to return to the first menu interface, then double click “off” button to turn off the screen and save the setting.
Brightness/Contrast/Color: At standby mode, press “Answer /Monitor” button to display an image, press“◄►” button to adjust the Brightness/Contrast/Color for the image. At monitoring mode, press “◄►” button to adjust Brightness. Press “Image capture” button to move between Brightness, Contrast, Color Settings. Function Guide Call & Unlock Function When a visitor calls from the doorbell/camera, the visitor’s image shows on the monitor screen. Press “Answer /Monitor” button to stop the chime.
camera channels,press button1 to turn off the screen. At standby mode, keep pressing button1 to monitor door1, door2, audio/video channel1, extension video channel1, extension video channel2, extending video channel3. Audio/Video Function In standby mode, press BUTTON 2 on any monitors 3 times to activate the Audio/Video function for listening music or watching TV, or monitoring the baby-rooms. CARE INSTRUCTIONS 1) 2) 3) 4) 5) Always use the recommended cables.