User manual
15
System
Settings – See MONITOR DESCRIPTION & BUTTON MAP
At
standb
y
mode,
press
and
hold
“Image capture” button for 5
seconds
to
get
into
the
set-up
mode
as
belo
w
.
1
st
line: Chime
Dur
ation T
ime
2
nd
line: Char
acter Add: Enable/Disable
“DOOR1/DOOR2”
on
monitor
screen
)
3rd line:
Main/Sub
Multiple
Monitor
set
up
HOLD
button 6 on
MAIN
or
SUB
for 3
seconds
At this point, pressing “Image capture” button will move to
the next value until Intercom/Main menu. Use “◄►” (button 5) to select Main or Sub.
When enter main panel selection。When cursor is at
MAINstatus, press button two seconds and then you will enter the second menu interface：
1
nd
line:
Setup doorbell active numbers
2
rd
line:
Setup video extending channels numbers
CHIME TIME SET: Chime
Dur
ation
T
he
default chime duration
is
30
seconds.
To
adjust
this
time:
When t
he
curser
fl
ashes
at
the
fi
rst
c
har
acter
of date,
keep
pressing
“Image capture” button to go to
the
chime
duration
setting. P
ress
“◄►”
button to
adjust
the
chime time.
T
he
chime duration
is
from 10
–
90
seconds.
CHAR ADD SET :
At standby mode, press “Image capture” button to get into the main menu setting interface. Move the cursor to
the 5
th
line, press
“◄►”
BUTTON to
choose Enable or Disable. "Enable" will display the character “DOOR1” or
“DOOR 2”. If choose “Disable”, the monitor screen will not display any characters.
INTERCOM SUB or MAIN Set:
If more than one monitor is installed, one monitor is set as “MAIN-1”. Additional monitors should be set as “SUB”.
DOOR NUM: Doorbell channel active number function：