Instruction manual

37
JAPANESE ENGLISH FRANÇAIS
2
Play the audio source.
Set the amplifi er volume to the level you normally listen at.
3
Increase the subwoofer's
volume and balance the
volume with the speakers
being used.
You can also adjust the
volume with the volume
control on the rear panel.
Adjusting the audio
Adjusting the volume
1
Set the volume to "-"
(minimum).
■
Rear panel
Volume control
Turned on
Remote
control
Front panel
(VOL/LPF)
or
Advice
The auto power function may not work when the speaker input terminal is
connected.
In this situation, use the remote control to switch to standby.
When using the subwoofer at extremely low volumes, turn the AUTO POWER
switch off to prevent malfunction.
•
•
Rear panel
AUTO POWER switch
Power on Standby
Lit in blue
10 minutes
No input signal
Input signal
Lit in orange
Automatically turning the power on and off (auto power)
The subwoofer is capable of automatically turning the power on and off by detecting
the presence of the input signal.
■
td725swmk2_en.indd 37td725swmk2_en.indd 37 2014/10/29 10:20:312014/10/29 10:20:31