Instruction manual

38
Switching the phase polarity
1
Switch the polarity to select
the method where the bass
sounds the richest.
■
Switching bass emphasis (BASS)
You can turn bass emphasis on
and off.
To return to normal, press the
BASS button once again.
■
Remote
control
Positive phase: Turned off
(default setting)
Negative phase: Turned on
ON: Turned on
OFF: Turned off
(default setting)
Front panel
Front panel
or
Remote
control
or
Adjusting the LPF
This function cuts off audio with a frequency higher than the set frequency.
For CDs and similar materials, we recommend adjusting the LPF with the subwoofer, and for
surround audio sources such as Blu-rays, we recommend turning the L.P.F selector switch off
and adjusting the LPF on the player or AV amplifi er.
1
Turn on the L.P.F selector
switch.
■
2
Set the LPF.
You can also adjust the
volume with the L.P.F
control on the rear panel.
If the mid-low range is insuffi cient, set the frequency higher.
(Range: 30 Hz to 150 Hz)
Rear panel
L.P.F selector switch
Turned on
Remote
control
Front panel
(VOL/LPF)
or
td725swmk2_en.indd 38td725swmk2_en.indd 38 2014/10/29 10:20:312014/10/29 10:20:31