Safety Data Sheets (SDS)

6.4 Reference to other secons
For disposal see secon 13
SECTION 7: Handling and storage
7.1 Precauons for safe hadling
Avoid contact with skin and eyes.
For precauons see secon 2.2.
7.2
Condions for safe storage, including any incompabilies
Moisture sensive.
Storage class (TRGS 510):
7.3 Specific end use(s)
Apart from the uses menoned in secon 1.2 no other specific uses are spulated.
SECTION 8: Exposure controls/personal protecon
8.1
Control parameters
Components with workplace control parameters
Contains no substances with occupaonal exposure limit values.
8.2 Exposure controls
Appropriate engineering controls
Personal protecve equipment
Eye/face protecons
Skin protecon
Full contact
Material : Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through me: 480 min
Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)
Splash contact
Material : Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through me: 480 min
Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)
Body protecon
Store in a cool place. Keep container ghtly closed in a dry and well-venlated place. Container s which are opened must be carefully
resealed and kept upright to prevent leakage.
Handle in accordance with good industrial hygiene and safety pracce. Wash hands before breaks and at the end of workday.
Tightly fing safety goggles. Faceshield (8-inch minimum). Use equipment for eye protecon tested a
nd approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's
outer surface) to avoid skin contact with this product. Dispose of contaminated gloves aer use in accordance with
applicable laws and good laboratory pracces. Wash and dry hands.
The selected protecve gloves have to sasfy the speci
ficaons of EU Direcve 89/686/EEC and
the standard EN 374 derived from it.
data source: KCL GmbH, D-36124 Eichenzell, phone [phone], e-mail [e-mail], test method: EN374
If used in soluon, or mixed with other substances, and under condions which differ from EN 374, contact the supplier of
the CE approved gloves. This recommendaon is advisory only and must be evaluated by an industrial hygienist and safety
officer familiar with the specific situaon of ancipated use by our
customers. It should not be c onstrued as offering an
approval for any specific use scenario.
Complete suit protecng against chemicals, The type of protecve equipment must be selected according to the
concentraon and amount of the dangerous substance at the specific workplace.
Eco Advancements, Inc. Page 3 of 6
SAFETY DATA SHEET
Revision Date : 9/10/18