Safety Data Sheets (SDS)

Respiratory protecon
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
SECTION 9: Physical and chemical properes
9.1
Informaon on basic physical and chemical properes
a - Appearance
b - Odor Mild (amine)
c - Odor threshold No data available
d - pH 4.5 - 6.0
e - Melng point / freezing
point
32°F / 0°C
f - Inial boiling point and
boiling range
212°F / 100°C
g - Flash point None
h - Evaporaon rate <1 (butyl acetone =1)
I - Flammability (solid, gas) > 200°F
j - Upper/lower ammability
or explosive limits
No data available
k - Vapor pressure No data available
l - Vapor density No data available
m - Relave density No data available
n - Water solubility (@ 20°C) Soluble
o - Solubility in organic solvent
(state solvent)
Soluble in alcohols
p - Paron coecient : n-
octanol/water
No data available
q - Auto-ignion temperature No data available
r - Decomposion
temperature
No data available
s - Viscosity
t - Explosive properes
u - Oxidizing properes
v -
Specic Gravity (H
2
O = 1)
20 CPS
No data available
No data available
1.01 (@ 25°C)
9.2 Other safety informaon
No data available
SECTION 10: Stability and reacvity
10.1 Reacvity
No data available
10.2
Chemical stability
Stable under recommended storage condions.
10.3 Possibility of hazardous reacons
Will not occur
10.4 Condions to avoid
No data available
10.5 Incompable materials
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with mul-purpose
combinaon (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the
sole means of protecon, use a full-face supplied air respirator. Use respirators and components tested and approved
under appropriate government standards such as NIOSH (US) or CEN (EU).
Form: liquid
Color: translucent to white
Eco Advancements, Inc. Page 4 of 6
SAFETY DATA SHEET
Revision Date : 9/10/18