Unit installation

ManualsBrandsEco Air ManualsConsumer electronicsECO2406SD

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

R410A SPLIT SERIES

DC INVERTER

Models

ECO2406SD

Summary of content (18 pages)

PAGE 1
R410A SPLIT SERIES DC INVERTER Models ECO2406SD Before using your air conditioner, please read this manual carefully and keep it for future reference.
PAGE 2
DISPOSAL When using this air conditioner in the European countries, the follow information must be followed: DISPOSAL: Do not dispose this product as unsorted waste. It is prohibited to dispose of this appliance in domestic household waste. For disposal, : A) Contact your local council for disposal. B) The manufacture will take back the old appliance for disposal when you replace with a new product. C) Old products contain valuable resources, which should be recycled as scrap metal.
PAGE 3
CONTENTS SAFETY PRECAUTIONS Warning ............................................................................................................................................2 Caution .............................................................................................................................................2 INSTALLATION INSTRUCTIONS Selecting installation place................................................................................................................3 Accessories .
PAGE 4
DISPOSAL When using this air conditioner in the European countries, the follow information must be followed: DISPOSAL: Do not dispose this product as unsorted waste. It is prohibited to dispose of this appliance in domestic household waste. For disposal, : A) Contact your local council for disposal. B) The manufacture will take back the old appliance for disposal when you replace with a new product. C) Old products contain valuable resources, which should be recycled as scrap metal.
PAGE 5
SAFETY PRECAUTIONS Read the follow SAFETY PRECAUTIONS carefully before installation. Electrical work must be installed by a licensed electrician. Be sure to use the correct rating and main circuit for the model to be installed. Incorrect installation due to ignoring of the instruction will cause harm or damage, and the seri ousness is classified by the following indications. WARNING This symbol indicates the possibility of death or serious injury.
PAGE 6
INSTALLATION INSTRUCTIONS Selecting installation place More than 15cm Read completely, then follow step by step. Indoor unit Do not expose the indoor unit to heat or steam. More than 12cm More than 12cm Select a place where there are no obstacles in front or around the unit. Make sure that condensation drainage can be conveniently routed away. More than 2.3m Do not install near a doorway. Fig.1 Ensure that the space on the left and right of the unit is more than 12cm.
PAGE 7
INSTALLATION INSTRUCTIONS Accessories Number Q ty Name of Accessories 1 Installation Plate 2 Clip Anchor 3 Self-tapping Screw A ST3.9X25 4 Seal (See Page 8 for details) 8 1 5 Drain Joint(See page 8 for details) 1 Connecting pipe Assembly 6 1 8 Liquid side 9.52 Gas side 16 Parts you must purchase (A minimum pipe wall-thickness of 0.7mm is required.) 7 Remote controller 1 8 9 Self-tapping Screw B ST2.
PAGE 8
INSTALLATION INSTRUCTIONS Indoor unit installation Correct orientation of Installation Plate 1. Fit the Installation Plate 1. Fit the installation plate horizontally on structural parts of the wall with spaces around the installation plate. 2. If the wall is made of brick, concrete or the like, drill eight (8) 5mm diameter holes in the wall. Insert Clip anchor for appropriate mounting screws. 3. Fit the installation plate on the wall with eight (8) type “A” screws. Fig.
PAGE 9
INSTALLATION INSTRUCTIONS 3. Connective Pipe and Drainage Installation Drainage 1. Run the drain hose sloping downward. Do not install the drain hose as illustrated below. Do not block water flow by a rise. Do not put the end of drain hose into water. Fig.7 2. When connecting extension drain hose, insulate the connecting part of extension drain hose with a shield pipe, do not let the drain hose slack. Connective pipe 1. For the left-hand and right-hand piping, remove the pipe cover from the side panel.
PAGE 10
INSTALLATION INSTRUCTIONS 5. Piping and wrapping Bundle the tubing, connecting cable, and drain hose with tape securely, evenly as shown in Fig.11. Because the condensed water from rear of the indoor unit is gathered in ponding box and is piped out of room. Do not put anything else in the box. Indoor unit Connective cable Ponding box Pipe room Connective pipe Wrapping belt Drain hose Fig.11 CAUTION Connect the indoor unit first, then the outdoor unit .
PAGE 11
REFRIGERANT PIPE CONNECTION Settlement of outdoor unit 590mm Anchor the outdoor unit with a bolt and nut 10 or 8 tightly and horizontally on a concrete or rigid mount. 333mm Air inlet Air inlet Air outlet Fig.13 Drain joint installation Fit the seal into the drain elbow, then insert the drain joint into the base pan hole of outdoor unit, rotate 90 to securely assemble them.
PAGE 12
ELECTRICAL WORK C: Putting nut on Remove flare nuts attached to indoor and outdoor unit, then put them on pipe/tube having completed burr removal.(not possible to put them on after flaring work) Flare nut Copper tube D: Flaring work Firmly hold copper pipe in a die in the dimension shown in the table below. Fig.17 "A" Bar Handle Bar Yoke Outer diam. (mm) 9.52 16 A(mm) Max. 1.6 2.4 Cone Min. 1.0 2.2 Copper pipe Clamp handle Red arrow mark Fig.
PAGE 13
ELECTRICAL WORK Minimum norminal cross-sectional area of conductors: Model 21000Btu/h Power supply Input Rated Amp (Switch/Fuse) 220-240V~ 50Hz or 220-230V~60Hz Rated current Nominal cross-sectional area of appliance 2 (A) (mm ) 0.75 >3 and <6 >6 and <10 1 >10 and <16 1.5 2.5 >16 and <25 32A/25A NOTE: The supply voltage must be consistent with the rate voltage of the air conditioner.
PAGE 14
AIR PURGING CAUTION CAUTION CAUTION CAUTION After the confirmation of the above conditions, prepare the wiring as follows: 1) Never fail to have an individual power circuit specifically for the air conditioner. As for the method of wiring, be guided by the circuit diagram posted on the inside of control cover. 2) The screw which fasten the wiring in the casing of electrical fittings are liable to come loose from vibrations to which the unit is subjected during the course of transportation.
PAGE 15
AIR PURGING When relocate the unit to another place, perform evacuation using vacuum pump. Make sure the refrigerant added into the air conditioner is liquid form in any case. (Not applicable to the units with R22 ) Caution in handling the packed valve Open the valve stem until it hits against the stopper. Do not try to open it further. Securely tighten the valve stem cap with aspanner or the like. Valve stem cap tightening torque (See Tightening torque table in previous page ).
PAGE 16
TEST RUNNING Safety and leakage check Electrical safety check Perform the electric safe check after completing installation: 1. Insulated resistance The insulated resistance must be more than 2M . 2. Grounding work After finishing grounding work, measure the grounding resistance by visual detection and grounding resistance tester. Make sure the grounding resistance is less than 4 . 3.
PAGE 17
MEMO Date of installation: Purchased from (Dealer Name): Date of purchase: Model number: Serial number:
PAGE 18
ONE (1)YEAR LIMITED WARRANTY Save This Warranty Information EcoAir guarantees this product free from defects in materials and workmanship for a period of one (1) year from the date of purchase, limited to parts only. Faults arising from a faulty installation is specifically excluded. This unit must be operated under conditions as recommended, at voltages indicated on the unit. Any attempts made to service or modify the unit by unqualified technician, will render this WARRANTY VOID.