Instruction manual

4.4. Electric data of gear-motors.
Lp. Description j.m.
Value
1. Type – motor with gear - -
2. Voltage AC ~V/Hz 230/50
3. Pole number P 2
4.
Motor characteristic without load
Power
Input power
Rotation speed
Start voltage
A
W
rot/min
V
0,65 ± 15%
72 ± 15%
5,4 ± 10%
161 MAX
5.
Load characteristic – after 1 min since start of motor
Limit load
Acceptable load
Start load
Nm
Nm
Nm
33 MIN
25 MlN
20 MIN
6. Max current A 1,2 MAX
7.
Dielectric resistance
Motor resistant voltage: 1500V RMS through 1 min
(1800V RMS through 1 sec) measured between coil and motor’s core (test
current 3 mA
- -
8.
Insulation coefcient 100 MΩ minimum at 500V of voltage measured
between coil and cover
- -
9. Thermal protection: Motor protected up 120°C - -
10. Insulation class klasa „E”
4.5. Heater’s technical data
L.p. Description j.m. Value
1. Lubrication – Mineral oil and grease - -
2. Noisness (without load) dB 25 MAX
3. Weight kg 2,2
4. Shaft position - horizontal - -
5. Shift - 1 : 532
L.p. Description j.m. Value
1. Type - GLO 120 - 400 - -
2.
Input voltage range ( cooperate with adapter 230/120
VAC )
V-AC 120 -15%/+10% (102 – 132)
3.
Current
A/V-AC 3,3 - 4,2/120
4. Heater power W 400
6. Heater temperature °C 1200
7. Time for warm. up to 1200°C sek. >12
9. Heater material: ceramic – recrystallised Si3N4 - -
10. Safety norm CSA - -
4.6. Heater’s technical data
19