Instruction manual

After pouring the pellets it is recommended to manually start the feeder in order to transport fuel
to the burner.
Go to menu MANUAL MODE, which is displayed below:
To turn on/off the feeder press
.
To turn on/off the blower press .
Feeders should work until lling the burner with fuel. Next switch the controller in ON mode, fuel
will be automatically light up.
3. Controller’s menu description
3.1. Menu handling
Controller has two types of menus: SIMPLE MENU and ADVANCED MENU.
ATTENTION !
To change type of menu: SIMPLE or ADVANCED press at the same time i
buttons. After 10 minutes of inaction from user menu will automatically be changed
on SIMPLE.
ATTENTION !
Instruction manual contains all control parameters available both in SIMPLE or
ADVANCED menu. Parameters from ADVANCED menu are written in italics.
To go in to the main menu press „ENTER” button.
-main menu, written with capital letters, buttons and are for move within main menu, to go in to
submenu press „ENTER”. To go out from submenu press „ESC”. Main menu is shown on pic.1
-submenu is for displaying and changing operation parameters. In order to change the parameter press
„ENTER” . Changing parameter will be displayed periodically. Changing parameter on different one press
or . To withdraw from changed parameter press „ESC”. To accept the changes press „ENTER”.
Pic.3 Manual mode.
Menu is shown in point 2 Controller description.
6