TDS

Safety Data Sheet
10-22 Mix B - Epoxy 3 Component Patch, High Build Epoxy Floor Coating
Date of Issue: 4/19/16
Page 3 of 7
Specific Hazards Arising
From the Chemical: Combustible material. Closed containers may rupture if exposed to fire or extr eme
heat. Keep product and empty container away from heat and sources of ignition.
Thermal decomposition can lead to release of irritating gases and vapors.
Sensitivity of Mechanical Impact: No.
Sensitivity to Static Discharge: Yes.
Flash Point Data:
Flash Point ˚F 200
Flash Point ˚C 93
Flash Point Method PMCC
Flammability Limits in Air:
Lower Explosion Limit Not Available
Upper Explosion Limit Not Available
SECTION 6: ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES
Personal Precautions: Use personal protective equipment. Remove all sources of ignition.
Other Information: Prevent further leakage or spillage if safe to do so. Do not allow material to contaminate ground
water system. Prevent product from entering drains. Do not flush into surface water or sanitary
sewer system. Local authorities should be advised if significant spillages cannot be contained.
ENVIRONMENTAL PRECAUTIONS
See section 12 for additional ecological information.
METHODS FOR CLEANING UP
Dam up. Soak up with inert absorbent material. Pick up and transfer to properly labeled
containers. Clean contaminated surface thoroughly.
SECTION 7: HANDLING AND STORAGE
PRECAUTIONS FOR SAFE HANDLING
Handling: Use only in area provided with appropriate exhaust ventilation. Do not breathe vapors or spray mist.
Wear personal protective equipment. Take presuationary measures against static discharges. To avoid ignition of vapors by
static electricity discharge, all metal parts of the equipment must be grounded. Keep away from open flames, hot surfaces
and sources of ignition.
CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMP ATIBILITIES
Storage: Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat. Keep
in properly labeled containers.
Incompatible Materials: No information available.