TDS

Safety Data Sheet
10-22 Mix A - Epoxy 3 Component Patch, High Build Epoxy Floor Coating
Date of Issue: 4/19/16
Page 4 of 8
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
CONTROL PARAMETERS - Exposure Guidelines
Chemical Name
ACGIH TLVs
OSHA PELs
4,4-isopropylidenediphenol- epichlorohydrin copolymer
N/E
N/E
Titanium dioxide
10 mg/m
3
- TWA
15 mg/m
3
- TWA
Silica, crystalline
0.025 mg/m
3
- TWA
respirable-(10)/(%Si02+2) mg/m
3
TWA
respirable-(250)/(%Si02+5) mppcf TWA
total dust-(30)/(%Si02+2) mg/m
3
TWA
Oxirane, mono[(C12-14-alkyloxy)methyl] drivs.
N/E
N/E
Nonylphenol
N/E
N/E
Solvent naphtha, petroleum, light aromatic
N/E
N/E
EXPOSURE CONTROLS
Engineering Measures: Ensure adequate ventilation, especially in confined areas.
Personal Protective Equipment
Pictograms: Safety Glasses. Protective Gloves. Protective Clothing. Respiratory Protection.
Eye/Face: Wear safety glasses or goggles with side shields.
Skin/Body: Wear suitable protective clothing - long sleeved clothing and protective gloves.
Respiratory: In operations where exposure limits are exceeded, use a NIOSH approved respirator that has been
selected by a technically qualified person for the specific work conditions. When spraying the product or
applying in confined areas, wear a NIOSH approved respirator specified for paint spray or organic vapors.
General Industrial
Hygiene Considerations: Avoid contact with skin, eyes and clothing. Remove and wash contaminated clothing before
re-use. Wash thoroughly after handling. When using, do not eat, drink or smoke.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES
Appearance Liquid
Odor Solvent
Odor Threshold No information available
Density (lbs/gal) 11.1 - 11.2
Specific Gravity 1.33 - 1.34
pH No information available
Viscosity (cps) No information available
Solubility No information available
Water Solubility No information available
Evaporation Rate No information available
Vapor Pressure No information available
Vapor Density No information available