User's Manual
Ventilator Max
If your system is equipped with a ventilation system, you can
manually switch the ventilator to the maximum setting directly
from your Smart Thermostat.
After you select this item, the ventilator switches into the
maximum mode for a pre-programmed period of time. The
ventilator then switches back to its normal operating state.
Scheduling a vacation
The Smart Thermostat’s Vacation feature helps you
conserve energy while you are away from your home
for extended periods of time and also ensures that
your home is comfortable when you return.
You can enter any number of uniquely named
vacations. Other features to choose from include:
ecobee optimize
Turn this option ON to tell the thermostat to
automatically set your heat temperature, cool
temperature, system mode and furnace fan settings
while you are away for maximum energy conservation.
Turn this option OFF to manually congure Heat
Temperature, Cool Temperature and Fan, as shown here:
Heat Temperature
Programs the set temperature when the system is in Heat mode, i.e.,
when the furnace is on. Set a lower temperature to save energy.
Cool Temperature
Programs the set temperature when the system is in Cool mode,
i.e., when the air conditioner is on. Set a higher temperature to
save energy. You can also choose to turn o your cooling system
while you are away to ensure it does not go on at all.
Fan
Toggles the fan setting between ON and Auto.
ON - The fan runs all the time regardless of programming or if there is
call for heat or cool. The fan will also run if the System Mode is OFF.
Auto - This option turns the furnace fan on only when the system
is heating, cooling or ventilating your home or to satisfy the
minimum fan on time as programmed by your technician during
the installation.
To schedule a vacaion:
From the Home
Screen, press More.
Press Vacation.
Press New and enter a
name and the dura-
tion of your vacation.
In either mode, the Smart Thermostat will ensure that when your
vacation ends the thermostat will revert to the regular settings.
Note: If you were running your regular program prior to the start of your
vacation, on your return the Smart Thermostat will restore your home to
those settings. If you were in Hold mode prior to the start of your vaca-
tion, the Smart Thermostat will restore the home to whatever the set
temperature was just prior to your vacation.
Resetting the Smart Thermostat
At some point during the life of the thermostat you
may want to quickly recongure it or restore it to
the default state.
Reset Registration
Resets the connection between your Smart Thermostat
and your personalized web portal.
After this reset, you must re-register your Smart
Thermostat if you want to continue to use your web
portal with this device.
All other preferences and setting will remain the same.
Reset Preferences/Program
Resets all your preferences, reminders, alerts and
programming to the original factory default state.
Wi settings and registration are not aected
Reset Installer Settings
Resets all the Installer setting back to the original factory
default state.
Note: This reset should only be performed by the
installation technician.
What to do if you move
If you decide to move there a few things you should
consider with regards to your ecobee system:
If you did not activate your personalized web portal you
simply take the Smart Thermostat with you, or leave it
in the house.
If you registered with ecobee.com, you need to update
your web portal to reect the change.
To Reset your thermostat:
From the Home
Screen, press More.
Press Settings.
Select Reset from
the list.. Choose the
Reset option that
suits your needs.
21 | 22