User's Manual
Feature Buttons
Feature buttons allow you to quickly access features of your eco-
bee Smart Thermostat. Pressing one of these buttons will active
that feature.
Register – Use the Register button to register your Smart
Thermostat with a personalized web portal at ecobee.
com. Refer to Web Registration below on page XX for
details. Once you’ve successfully registered, this button
is replaced by the Weather button.
Weather – The Weather button displays the current out-
door temperature and weather conditions for your home
location. Press this button to see the full ve-day forecast.
Please note that when you register your thermostat, it is
important to select your location accurately as ecobee will
use your local weather data to better control your heating
and cooling. You must register your thermostat for this
feature to operate.
Details – Press the Details button to see system details
such as humidity levels and furnace fan settings. If you
have a ventilator, humidier or dehumidier connected,
Details displays the current settings for those as well.
Program – Press Program to pre-program the desired
temperatures throughout the day for each day of the
week. Programming is the key to saving money on energy
bills because it lets you reduce energy consumption when
no one is home. The icon on this button changes to show
which period of the day (awake, away, home, sleep) is cur-
rently in eect.
If your thermostat has been manually adjusted, then the
Resume button will be displayed. Pressing the Resume
button will cause the system to revert back to the
scheduled program.
Quick Save – Pressing this button as you leave your home
will put your thermostat in an energy savings congura-
tion, much like turning o a light switch. To return your
thermostat to its previous settings, simply touch the touch
screen again.
More – Press this button to navigate to the full suite of
features available on your Smart Thermostat.
Cleaning the touch screen
Press the Clean me button to deactivate your touch
screen so that you can wipe it with a cloth. You can
clean the Smart Thermostat touch screen by spraying
water or any mild, non-abrasive household cleaner
suitable for glass surfaces into a clean cloth. Wipe the
surface of the touch screen with the slightly dampened
cloth.
Note: Do not spray any liquids directly onto your
Smart Thermostat.
The touch screen will be deactivated for 30 seconds
allowing you to wipe it clean. The time to reactivation of
the touch screen will count down.
Displaying information about your
Smart Thermostat
The About section of your thermostat displays useful
information about the thermostat and the technician
who installed it. You may need this information if you
are having diculties or require technical support.
The About screen displays the following information:
Copyright Information
ecobee Website
MAC Address – The Media Access Control address as-
signed to the Wi radio in your Smart Thermostat,
Serial Number – The number assigned to your Smart
Thermostat when it was manufactured,
Hardware Revision – The revision of the physical hardware
of your Smart Thermostat. This is currently called
Build Number,
Manufacturing Date – The date your Smart Thermostat
was manufactured,
Software Version – The current version of software run-
ning on your Smart Thermostat and Installer Information
(optional) If your installer has entered their contact infor-
mation then that information will appear here.
To clean the touch screen:
From the Home
Screen, press More.
Press Clean Me.
To display the About screen:
From the Home
Screen, press More.
Press Settings.
Select About from
the Menu.
5 | 6