User's Manual

| 250 University Ave | Suite 400 | Toronto, Ontario | M5H 3E5
Toll Free 1.877.932.6233, Int. 1.647.428.2220, [e-mail]
List of Alerts
Below is a complete list of alerts. Depending on your
configuration, some of these may not apply to your
system.
• Low Battery
• Furnace Air Filter
• Ventilator Filter
• UV Lamp
• Humidifier Filter
• Comms fault
• Low Temp. Alert
• High Temp Alert
• Low Humidity Alert
• High Humidity Alert
• Heat Not
• Responding
• Cool Not
• Responding
• Input 1
• Input 2
• Maintenance
• Reminder
• Auxiliary Heat
• Run Time
• Auxiliary Outdoor
• Temperature
• The battery in your Thermostat will need
• to be changed soon.
• Your furnace filter needs to be
• cleaned/changed.
• Your ventilator filter needs to be
• cleaned/changed.
• Your UV lamp needs to be changed.
• Your humidifier pad needs to be
• cleaned/changed.
• There is no communication between the
• Thermostat and the Equipment Interface
• module.
• The temperature in the home is too low.
• The temperature in the home is too high.
• The humidity in the home is too low.
• The Humidity in the home is too high.
• The system has failed to heat the home.
• The system has failed to cool the home.
• Used if this input is programmed to
• generate an alert.
• Used if this input is programmed to
• generate an alert.
• You are due for regular maintenance.
• Your auxiliary heat source is running
• too often.
• Your auxiliary heat source is running
• at higher than expected outdoor
• temperatures.