User's Manual
21
Compressor Speed – displays the current compres-
sor speed in revolutions per second.
Comp Current – displays the current compressor
amperage.
Inverter Current – displays the amperage draw of
the inverter.
Comp Input Power – displays the power consump-
tion of the compressor in watts.
Comp DC Voltage – displays the current DC bus
voltage from the inverter.
Comp Heat Sink Temp – displays the temperature
of the inverter heat sink.
– Blower Diagnostics
ECM Target Air ow – displays the blower target
cfm.
ECM Blower Speed – displays the blower rpm.
ECM Blower Power – displays the power consump-
tion of the blower in watts.
ECM Blower Static – not used.
Leaving Air – displays the temperature of the air
leaving the unit.
Entering Air – displays the temperature of the air
entering the unit.
– Loop Diagnostics
Loop Pump Speed – displays the speed of the loop
pump as a percentage.
Loop Pump Watts – displays the power consump-
tion of the loop pump in watts.
Loop Flow – displays the source ow rate in gpm.
Entering Water – displays the temperature of the
water entering the source heat exchanger.
Leaving Water – displays the temperature of the
water leaving the source heat exchanger.
Water pressure – displays the pressure of the water
as it leaves the source heat exchanger.
– Hot Water Pump Diagnostics (If Applicable)
DHW Pump Speed – displays the speed of the DHW
pump as a percentage.