User's Manual

Alerts
The Smart Si thermostat can generate alerts if the
temperature in the home goes over or under a pre-
programmed level. This protects the home from
damage due to freezing and/or excessive heat.
This alert, along with optional technician contact
information will be displayed on the screen. If the
homeowner registers the thermostat, the alert will
be emailed to them and be displayed in the web
portal.
Low Temp Alert Sets the temperature at which the
thermostat will generate a Low Temperature Alert.
The range can be:
O – no alert will be generated.
Set temperature range of 35 to 68 °F (1.5 to 20
°C).
High Temp Alert Sets the temperature at which
the thermostat will generate a High Temperature
Alert. The range can be:
O – no alert will be generated.
Set temperature range of 60 to 104 °F (15.5 to
40 °C).
Display Alerts on Thermostat
Select No if you do not want any of the alerts to be
displayed on the Smart Si thermostat screen. Alerts
will continue to be displayed on the web portal and
sent via email.
Enable Heating/Cooling Alerts
Select No to disable alerts for heat/cool error
conditions. If disabled, alerts indicating that the
system failed to heat or cool will not be appear in
the screen, web portal, or emails.
30