Technical Specifications
ASTM E96: - Meets typical water vapor transmissions for “Flat” latex paint
ASTM E84 – To be fire resistant with the highest rating available: Flame Spread of “0”, Smoke
Developed “0” NFPA/BC Class A Coating.
__________________________________________________________________________________________
Recommended Use
Use to seal and treat lead paint/dust as a self-priming interior paint or as an exterior primer prior to
application of standard exterior topcoats. Ideal for offices, retail/commercial/industrial facilities, DOT
structures, schools and residential applications. Superior adhesion on most properly prepared substrates. The
unique Paint It On, Leave It On formula® can be used on a variety of surfaces including but not limited to:
wood, drywall/plaster, steel, masonry, brick, metal, concrete and asphalt.
Coverage
250-300 sf/gl depending on surface texture, porosity and application method.
Note: Recommended film thickness for single coat is 4-6 mil wet for typical application.
Additional layers may be required for higher concentrations of lead.
Drying Times (@70-77°F, 50% RH)
To the Touch – 2-4 Hours
To Recoat/Topcoat – 4 Hours
Note: High humidity, low temperatures and poor ventilation will affect dry times.
Recommended Application Tools
Airless Sprayer: Recommended tip size .017 - .031
Roller: High quality 1/2” – 3/4” nap
Brush: Nylon/Polyester blend
Mixing
Mix thoroughly for 1-3 minutes. Prior to use, mechanically shake or mix with a drill powered paint mixer.
Application
Apply when air and surface temperatures are between 50 and 100°F
Thoroughly mix prior to use for 1-3 minutes with drill powered mixer or have mechanically shaken
Initial testing is recommended by painting a small area prior to full application to confirm compatibility
Apply as supplied using a sprayer, roller or brush
Protect surface from rain or moisture until dry
Clean-up
Wash hands and tools with water. Clean up spills immediately with water.
Storage
Store in a dry place at temperatures between 40°F (4.5°C) and 90°F (32°C).
Disposal
Dispose of all waste in accordance too local, state and federal regulations.