Specifications

Step C: Install RO Filter Assembly

INSTALL REVERSE OSMOSIS FILTER

ASSEMBLY

The Reverse Osmosis Filter Assembly is mounted on

hanger washers.

See Fig 13. The hanger washers allow you to lift the fil-

ter assembly from the washers without any hardware

removal. When planning your installation, you need to

leave room for changing filters.

Complete the following steps to install your Reverse

Osmosis Filter Assembly:

1. Remove the cover.

2. Locate mounting slots on back inside of the assem-

bly. See Fig 13.

3. Hold the assembly up to the wall surface and mark

locations for the hanger washers. See Fig 13. Mount

the unit high enough to allow room to change filters

without taking the unit off of the wall.

4. Fasten the hanger washers to the wall using the

screws provided.

5. Hang assembly on washers.

6. Replace cover.

9''

FIG. 13

Screw (2)

15-1/2'' minimum up

from floor. This allows

space to remove and

change filters

Hanger

Washer (2)