Specifications

Troubleshooting

Problem: Water leaking from faucet airgap hole.

Cause: Drain side of faucet airgap (3/8” black tub-

ing) plugged, restricted or incorrectly con-

nected to drain point.

Correction: Inspect and eliminate restriction or plug. Check that drain line is

routed properly. Refer to installation instructions for proper drain

connection. See pages 6 & 7.

Problem: Water leaks at push connect fittings

Cause: Tubing not cut square. Correction: Cut tubing square. See pages 16 & 17.

Cause: Tubing not pushed in all the way. Correction: Push tubing in all the way. See pages 16 & 17.

Cause: Tubing nicked. Correction: Remove tube from connection. Remove nicked portion by cutting

tube to shorter length. Reinsert in connection. See pages 16 & 17.

If removing the drain line, leave in place the elbow fitting that it con-

nects to. See page 23.

Cause: Outer tubing surface finish not smooth. Correction: Remove tube from connection. Remove problem area by cutting

tube to shorter length. Reinsert in connection. See pages 16 & 17.

If removing the drain line, leave in place the elbow fitting that it con-

nects to. See page 23.