Product Specs

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC INFORMATION (additional)
OEM INTEGRATION INSTRUCTIONS:
This device is intended only for OEM integrators under the following conditions: The module must be installed in the host
equipment such that 20 cm is maintained between the antenna and users, and the transmitter module may not be co-
located with any other transmitter or antenna. The module shall be only used with the internal antenna(s) that has been
originally tested and certified with this module. As long as 3 conditions above are met, further transmitter test will not be
required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance
requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).
Validity of using the module certification:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another
transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered
valid and the FCC ID of the module cannot be used on the final product. In these circumstances, the OEM integrator will
be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
Module label:
FCC ID: 2A2P9-NRF52832
The final end product must be labeled in a visible area with the following: “Contains FCC ID:2A2P9-NRF52832 ”.
Information that must be placed in the end user manual:
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF
module in the user's manual of the end product which integrates this module. The end user manual shall include all
required regulatory information/warning as show in this manual.
The module not applicable Limited module procedures. The module is a Single module and complies with the requirement
of FCCPart15.2
The module has its own antenna ，anddoesn'tneedahost's printed board microstriptrace antenna etc, Not applicable Trace
antenna designs
List of applicable FCC rules
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment
Specific operational use conditions
This device is intended only for OEM integrators under the following conditions: The module must be installed in the host
equipment such that 20 cm is maintained between the antenna and users, and the transmitter module may not be co-
located with any other transmitter or antenna. The module shall be only used with the internal antenna(s) that has been
originally tested and certified with this module. As long as 3 conditions above are met, further transmitter test will not be
required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance
requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).
Validity of using the module certification:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another
transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered
valid and the FCC ID of the module cannot be used on the final product. In these circumstances, the OEM integrator will
be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
Limited module procedures
The product is an unrestricted module.