User Manual

9205-3000 (FAS1548) Nexa™ Touch Free Dispenser Beacon User’s Guide
Ecolab, Inc.
Ecolab P/N
Revision
Date
Drawing Number
Page
9205-3000
??
03/03/17
???
8 of 14
2.3 Installing the Touch Free Dispenser Beacon in a Nexa™ Touch Free Dispenser
The Nexa TDB can only be used in the large (“Classic”) version of the Nexa Touch Free Dispenser.
In order to install the beacon follow these steps:
(1) Open the dispenser by depressing the top latch button.
(2) Remove product bottle (if any) from the dispenser and set aside.
(3) Remove the rubber communication port cover in the back of the dispenser (see figure 4) and discard.
(4) Align the TDB plug with the communication port, and the housing’s captive screw with the screw boss in
the back of the dispenser (see figure 4).
(5) Gently but firmly insert the TDB plug into the communication port, until it is firmly seated in the port.
(6) Tighten the captive screw finger tight into the boss.
(7) Replace the product bottle within the dispenser.
(8) Close the dispenser.
Figure 4. TDB Installation into Nexa™ Touch Free Dispenser
Communication
Port Cover
TDB
Plug
Installation: alignment of
TBD with dispenser boss
and communication port
Screw
Boss