Installation Instructions

Protection at the press of a button.
Ring Panic Button is an instant trigger for Ring Alarm.
In case of emergency, Panic Button can be used
to signal your Ring Alarm Base Station to sound its
siren. If you’re subscribed to Ring Protect Plus, our
24/7 professional monitoring center is notified and
emergency responders can be dispatched.*
Before you proceed...
The Panic Button can trigger an alarm as soon as you
add it to your system. To prevent false alarms, continue
with setup only when ready.
Contents
1. Diagram
2. In-app Setup
3. Physical Installation
4. Additional Information
Begin the setup process near your
Ring Alarm Base Station.
In the Ring app, tap Set Up a Device.
Choose Security Devices, then Base Station,
then Ring Panic Button, and tap Add Device.
To complete the setup process, follow the
in-app instructions.
When prompted, scan the QR Code
or enter the PIN.
This begins the pairing process.
The QR Code and PIN are on the back of your
Panic Button and in the product packaging.
How it looks... How it works...
To signal your Ring Alarm, press and hold the
Panic Button for 3 seconds. The LED ring will
turn blue.
As the Panic Button signals your Base Station, the LED
ring will rapidly pulse blue.
Once your Panic Button successfully signals
your Alarm, the LED will alternate between red
and blue five times.
The siren will sound and, if subscribed to Ring Protect
Plus, we will notify the monitoring center and
emergency responders may be dispatched.
* For more info on Ring Protect Plus and 24/7 professional monitoring, visit
ring.com/protect-plans.
If you’ve recently set up a Ring Alarm, professional monitoring won’t be
available until after the seven-day Practice Mode runs out.
1.
Say hello to your
Ring Panic Button.
Mounting
bracket
Panic Button
Panic Button
for Ring Alarm
Setup
button
2.
Set up your
Panic Button
in the Ring app.
LED ring
Ring_Panic_Button_manual.indd 3,9 12/18/18 8:40 AM
95mm
95mm