Installation Instructions

© 2020 Ecolink Intelligent Technology Inc. PN DWWZWAVE2.5-ECO R1
ADD
ITIONAL NOTES AND SUMMARY:
• With either mounting method the first step is to attach the sensor mounting bracket to the mounting surface. (The mounting bracket is used
regardless of choice of screws or tape).
• The sensor can slide onto the mounting bracket in two different ways. To ensure that the sensor is securely fastened it is recommended that the
tab on the bracket engage the back of the sensor.
• Before attaching the bracket to a surface note how the bracket will need to be oriented in order for the tab to engage the sensor. The required
orientation of the sensor determines the bracket orientation.
• The sensor slides onto the bracket until the tab engages. Please be advised that adhesive tape may damage the surfaces to which it is attached
Z-Wav
e Plus Specific Information
Z-Wave Plus is a wireless mesh network and data protocol that allows devices from many different manufacturers to interoperate. This device
implements Z-Wave Plus functionality, Network Wide Inclusion, and Explorer frames. This device is asleep most of the time but can respond to queries
on a Wake-Up Notification; however, for test purposes, the device will stay awake while tampered for testing Z-Wave Plus command class functionality.
The following information is intended for software engineers working on Z-Wave Plus controllers and home automation enthusiasts to integrate the Z-
Wave Plus sensor into their system.
SENSOR
CONDITION
COMMAND CLASS and VALUE
ASSOCIATION GROUP
CONFIGURABLE?
Probes are DRY
(sensor open)
Notification Report of Access
Control (0x06), Door/Window is
open (0x16)
1
Yes via Notification Set of notification
Type (0x06) and status of 0x00: This type
of notification turned off
0xFF: This type of notification turned on
Sensor Binary Report of 0xFF
Sensor Type: 0xFF
1
Yes via Configuration Command Class
Parameter Number: 2 Size: 1
A Configuration Value: 0xFF (On) / 0x00
(Off)
Basic set of 0xFF (On)
2
No
Probes are WET
(sensor closed)
Notification Report of Access Control
(0x06), Door/Window is closed
(0x17)
1
Yes via Notification Set of notification
Type (0x06) and status of 0x00: This type
of notification turned off
0xFF: This type of notification turned on
Sensor Binary Report of 0x00
Sensor Type: 0xFF
1
Yes via Configuration Command
Class Parameter Number: 2
Size: 1
A Configuration Value: 0xFF (On) / 0x00