User's Manual

Automatically Enabling Service
To automatically enable service:
1.
From the Today screen, tap the i.roc x20 Wireless icon in the
Command bar.
2.
Tap Bluetooth > Settings > Services tab.
3. In the Services box, select the service you want to enable: File
Transfer, Information Exchange, Serial Port, Personal Network
Server, Hands free, or Dial-up Networking Server.
4.
The Service settings automatically enable the service and
authentication settings. Tap on the appropriate checkbox to
change these settings to your preference.
5.
Tap OK to return to the i.roc x20 Wireless Screen if you enabled
Personal Network Server or Dial-up Networking Server.
Note: If you select Authorization required in the Service Settings, you
must authorize each connection. Your Pocket PC will then always ask
you if the connection should be permitted.
If you enabled File Transfer, Information Exchange, Serial Port, or
Hands free, tap the Advanced... button and follow the directions
below for the appropriate service setting.
File Transfer Advanced Settings
When you enable File Transfer, you need to set a shared folder from
which to transfer outgoing or in which to receive incoming files.
1.
Tap the folder icon and locate a desired file folder.
2.
Tap OK to save the settings and exit the screen.
3.
Tap OK again to return to the i.roc x20 Wireless screen.