User's Manual

Performing a Hard Reset
(Windows Mobile 2003 SE)
Perform a hard reset only when you want to clear all user-installed
settings, applications, and data from RAM (Random Access Memory),
where data and applications you have loaded are stored. also after the
battery is completely discharged, the device will operate in the same
way after Hard-Reset. All i.roc x20 are equipped with a so called
Autoinstallation tool, you can reload predefined programs and settings
automatically.
CAUTION: If you perform a hard reset, your Pocket PC loses all data and
programs not saved in i.roc x20 File Store.
Performing a hard reset (Windows Mobile 5)
A Hard Reset stops all running applications, but does not erase any
programs or saved data. Additional to a soft reset all hardsware
registers will be erased.

To perform a Hard Reset press and hold down the F1 and F4
buttons

While holding down these buttons, press the reset buttons for
about two seconds

When the Pocket PC screen begins to fade, release the F1 and
F4 buttons first and then release the reset buttons.
Note: If you simultaneously push and hold the Reset, F1 and F4 buttons
for more than two seconds, the battery disconnects. To restart the
device, either plug the device inti the AC Adapter or press the reset
buttons again.

The Pocket PC resets and powers on.