User's Manual

Powering Wi-Fi On or Off
To use Wi-Fi on your ecom i.roc x20, you need to turn on Wi-Fi and set
up your device.
Note: The Wi-Fi antenna for the ecom i.roc x20 is located in the top of
the device. If you cover up the top of the ecom i.roc x20 after you have
turned on Wi-Fi, signal strength may be affected.
To turn the Wi-Fi on or off:
1.
From the Today screen, tap the i.roc x20 Wireless icon
(
) in the Command bar located at the bottom of the
screen.
2.
Tap the Wi-Fi button.
When Wi-Fi is powered on, the Wi-Fi icon on the i.roc x20
Wireless screen turns from gray to amber, and the Wi-Fi
light-emitting diode (LED), located on the top left corner of
the device, flashes blue indicating one or more radios are
on. When a wireless connection is made, the Wi-Fi icon on
the i.roc x20 Wireless screen turns from amber to green.
Note: Even though the LED flashes blue to indicate Wi-Fi is turned on, it
does not necessarily mean a connection has been established with
another device or access point.
If Wi-Fi is off, the Wi-Fi icon turns from green or amber to
gray.
Note: Some Access Points and networks do not support one or more of
the power saving modes that are available. If you cannot connect with
a particular wireless network, try turning off the Wi-Fi Power Save
modes.