User's Manual

Searching for Networks to Access
Networks that you have already configured are preferred networks and
can be found on the i.roc x20 Wireless screen > Settings > Wireless
Networks list box. You can choose whether to connect only to
preferred networks or to have your ecom i.roc x20 search for and
connect to any available network (preferred or not).
1.
From the i.roc x20 Wireless screen, tap Settings > Wireless tab.
2.
In the Networks to access box, tap the type of network you
want to connect to (All Available, Only access points, or Only
computer-to-computer).
3.
To connect only to networks that have already been
configured, clear the Automatically connect to non-preferred
networks checkbox.
Note: If you check the Automatically connect to non-preferred
networks checkbox, your ecom i.roc x20 detects any new networks and
provides you the opportunity to configure them.
9.2 Managing Wireless Network Settings
In managing your wireless networks, sometimes it is necessary to
change network settings. In the next two sections, learn how to view,
edit, and delete available wireless network settings.
Viewing or Editing a Wireless Network
To view or edit an existing or available wireless network:
1. Be sure Wi-Fi is powered on.
2. From the i.roc x20 Wireless screen, tap Settings > Wireless tab.
3.
In the Wireless networks box, tap the desired network name.
4.
Edit the existing settings as necessary, and then tap OK to save
the changes.