User's Manual

To change server settings:
1. Contact your ISP or network administrator to determine which
name resolution to use, obtain the specific server address, and
determine whether alternate addresses are available.
Note: An alternate address may enable you to connect when the
primary server is unavailable.
2.
Be sure the Wi-Fi is on.
3. From the i.roc x20 Wireless screen, tap Settings > Network
Adapters tab.
4. In the My network card connects to... dropdown box, tap
either The Internet or Work.
Note: If you are connecting to your ISP at home, tap The Internet. If you
are connecting to a private network such as a corporate network at
work, you should tap Work.
5.
In the Tap an adapter to modify settings box, tap ecom i.roc
x20 Wi-Fi Adapter.
6. Tap the Name Servers tab and enter the requested
information.
7.
Tap OK to save your settings.
Setting Up VPN Server Connections
A VPN connection enables you to securely connect to servers, such as a
corporate network, via the Internet. To set up a VPN server connection:
1.
Contact your network administrator for your user name,
password, domain name, TCP/IP settings, and host name or IP
address of the VPN server.
2.
Tap the Connections icon ( or )> Settings > Task tab
on the Connections screen.