User's Manual

4. Tap the Retrieve Certificate button to download the certificate
from the server. The status box at the bottom of the screen will
indicate whether the attempt to retrieve the certificate was
successful.
Note: The enrollment tool is specifically designed to interact with
Microsoft Certificate Servers. Alternate Certificate Authority servers
will require a custom enrollment application which can be developed
using the Embedded Visual C 4.0 tool and the Software Development
Kit for Windows Mobile 2003-based Pocket PCs.
LEAP Registration Utility
Cisco Lightweight Extensible Authentication Protocol (LEAP) is an
802.1X authentication protocol that uses a username and password
pair to authenticate access by a wireless client to a wireless router.
Use of the LEAP registration utility is required to log on to a LEAP-
authenticated network. Most of the other types of secure networks are
set up automatically by the ecom i.roc x20 Wi-Fi connection software.
However, accessing a LEAP-authenticated network requires initial
registration using this utility. Once you have authenticated and
accessed this type of network, a connection can take place
automatically whenever you access the LEAP-authenticated network.
To register the LEAP utility:
1.
Tap Start > Settings > Connections tab > LEAP.
2.
Tap New to create a LEAP profile. A LEAP profile must contain
the following information:

SSID
 Username

Password
 Domain