User's Manual

Datum // date
10.07.2014
Teile-Nr. // part no.
300011
Dokument-Nr. Revision //
document no. revision
300011AL11E 07
Head Module Settings
User Manual
Seite/gesamt // page/total
10 / 25
Dokument erstellt // document created
SAS387 10.07.2014
Dokument geprüft // document checked
FIH091 10.07.2014
User Manual: Head Module Settings ● Ablageort: C:\Users\de0216\Documents\Quellcode\EcomService\user_manual_head_module_settings\300011AL11E07_user_manual_head_module_settings.docx ● template no.: 0730QV06A03 ● template created: HAO006 20.01.2011 ● template checked: BEA373 20.01.2011 ● location: ISO drive ●
Explanation of the settings for the S# - SE955:
Setting
Description
COM Port
Serial port of the scanner.
Laser On Time
Timeout for scanning a barcode.
Scan Angle
Angle for scanning a barcode (allowed values are
narrow or wide).
Symbologies->UPC/EAN
UPC-A
Enable or disable decoding of UPC-A barcodes.
UPC-E
Enable or disable decoding of UPC-E barcodes.
UPC-E1
Enable or disable decoding of UPC-E1 barcodes.
EAN-8
Enable or disable decoding of EAN-8 barcodes.
EAN-13
Enable or disable decoding of EAN-13 barcodes.
Bookland EAN
Enable or disable decoding of Bookland EAN
barcodes.
Decode UPC/EAN Supplementals
Ignore = Decodes UPC/EAN barcodes and ignores
potential supplemental characters.
Decode = Decodes only UPC/EAN barcodes with
supplemental characters.
Autodisriminate = see “Decode UPC/EAN
Supplemental Redundancy”
Smart Supplemental Mode = EAN-13 barcodes with
a prefix of ‘378’, ‘379’ or ‘978’ and supplemental
characters are decoded with the supplemental
characters. For all other UPC/EAN barcodes, the
supplemental characters are ignored.
378/379 Supplemental Mode = EAN-13 barcodes
with a prefix of ‘378’ or ‘379’ and supplemental
characters are decoded with the supplemental
characters. For all other UPC/EAN barcodes, the
supplemental characters are ignored.
978 Supplemental Mode = EAN-13 barcodes with a
prefix of ‘978’ and supplemental characters are
decoded with the supplemental characters. For all
other UPC/EAN barcodes, the supplemental
characters are ignored.
Decode UPC/EAN Supplemental Redundancy
This setup indicates how many times a barcode
without supplemental characters is decoded before
transmission (a value from 2 to 30 is allowed).
The option “Autodisriminate” must be selected.
Transmit UPC-A Check Digit
Enable or disable whether the check digit of a UPC-
A barcode should be transmitted.
Transmit UPC-E Check Digit
Enable or disable whether the check digit of a UPC-
E barcode should be transmitted.
Transmit UPC-E1 Check Digit
Enable or disable whether the check digit of a UPC-
E1 barcode should be transmitted.
UPC-A Preamble
No Preamble = Transmit no preamble for UPC-A.
System Character = Transmit system character as
preamble for UPC-A.
System Char. + Country Code = Transmit system
character and country code as preamble for UPC-A.