User's Manual

Datum // date
10.07.2014
Teile-Nr. // part no.
300011
Dokument-Nr. Revision //
document no. revision
300011AL11E 07
Head Module Settings
User Manual
Seite/gesamt // page/total
18 / 25
Dokument erstellt // document created
SAS387 10.07.2014
Dokument geprüft // document checked
FIH091 10.07.2014
User Manual: Head Module Settings ● Ablageort: C:\Users\de0216\Documents\Quellcode\EcomService\user_manual_head_module_settings\300011AL11E07_user_manual_head_module_settings.docx ● template no.: 0730QV06A03 ● template created: HAO006 20.01.2011 ● template checked: BEA373 20.01.2011 ● location: ISO drive ●
1.11 Good Read
The Head Module Settings provide an option to set a beep for ringing out after a good read. To set this,
open the Head Module Settings and click on “Good Read” (see Pic18). In the next window (see Pic19)
you have the opportunity to set “No beep”, “One beep” or “Two beeps”. Save your setting by clicking the
OK button.
Pic18: Head Module Settings Pic19: Beep options
1.12 Enable Service
A new option is included from version 1.7.5. You are now able to enable or disable the EC_Service. To
set this, open the Head Module Settings and click on “Enable Service” (see Pic20). In the next window
(see Pic21) you can enable or disable the EC_Service by checking or unchecking the checkbox. A
message is shown that you have to confirm the setting by clicking the OK button and that you have to
reboot the device. This has to be done because this setting has only an effect when it is confirmed with
OK and when the device is rebooted!
Pic20: Head Module Settings Pic21: Enable Service