User's Manual

Datum // date
10.07.2014
Teile-Nr. // part no.
300011
Dokument-Nr. Revision //
document no. revision
300011AL11E 07
Head Module Settings
User Manual
Seite/gesamt // page/total
20 / 25
Dokument erstellt // document created
SAS387 10.07.2014
Dokument geprüft // document checked
FIH091 10.07.2014
User Manual: Head Module Settings ● Ablageort: C:\Users\de0216\Documents\Quellcode\EcomService\user_manual_head_module_settings\300011AL11E07_user_manual_head_module_settings.docx ● template no.: 0730QV06A03 ● template created: HAO006 20.01.2011 ● template checked: BEA373 20.01.2011 ● location: ISO drive ●
2 Trigger Button Settings
2.1 Map the trigger event “OEM Trigger” on a button
This is necessary to start reading with a head module. There is an event named “OEM Trigger” which
is used in the service of the head modules to start reading with a head module. This event is mapped
on the center scan and the left side lower button by default. You have five opportunities to map this
event on a button: on the center scan button, on the left side upper button, on the left side lower
button, on the right side upper button and on the right side lower button. To map a button on the
event open the Intermec Settings. Therefore you have to click on the windows icon on the main
screen. In the next step you have to click on Settings -> System -> Intermec Settings. To map the
event on a button click on Device Settings -> Keypad -> Button Remapping (see Pic24-Pic26) in the
Intermec Settings. In the next window you can map the “OEM Trigger” event on a button which you
want to use to start reading with a head module (see Pic27).
Pic24: Intermec Settings Pic25: Device Settings
Pic27: Button Remapping
(“OEM Trigger” is mapped on the
center scan and the left side lower
Pic26: Keypad button by default)