User's Manual

Datum // date

10.07.2014

Teile-Nr. // part no.

300011

Dokument-Nr. Revision //

document no. revision

300011AL11E 07

Head Module Settings

User Manual

Seite/gesamt // page/total

23 / 25

Dokument erstellt // document created

SAS387 10.07.2014

Dokument geprüft // document checked

FIH091 10.07.2014

User Manual: Head Module Settings

● Ablageort: C:\Users\de0216\Documents\Quellcode\EcomService\user_manual_head_module_settings\300011AL11E07_user_manual_head_module_settings.docx

● template no.: 0730QV06A03 ● template created: HAO006 20.01.2011 ● template checked: BEA373 20.01.2011 ● location: ISO drive ●

 Third step is to map a key to the event index X of the named events “DeltaTriggerEvent” and

“StateTriggerEvent”. You can find the registry entries for the active keys of the keyboard in the

“0001” folder at the path you have located in the first step

(“Drivers\HID\ClientDrivers\ITCKeyboard\Layout\B-Numeric\0001”). There are 3 “ShiftPlanes”

in which the key functionalities are described:

o ShiftPlane0 – Normal – is used if neither Gold nor Aqua key is pressed

o ShiftPlane1 – Gold – is used if the Gold key is pressed

o ShiftPlane2 – Aqua – is used if the Aqua key is pressed

In the described example the events should be mapped to the blue center scan button. For

mapping the center scan button on the events “DeltaTriggerEvent” and “StateTriggerEvent”

you must modify the value for that key in “ShiftPlane0”, “ShiftPlane1” and “ShiftPlane2”. The

value of that key is “07 90 00 02 02 01” where 07 = USB code page, 90 = USB usage, 00 02

02 = flags (02 = non-repeating (key does not auto repeat), 02 = key reacts on a named event),

01 = index of the named event. The only thing which is to do for mapping this key on the

created named events is to change the last value “01” to “05” because the created events

“DeltaTriggerEvent” and “StateTriggerEvent” have the index 5 because of “Event5” in the

registry. So add the new value “07 90 00 02 02 05” at the bottom of the list in the “ShiftPlane0”,

“ShiftPlane1” and “ShiftPlane2”. Now the center scan button is mapped to the created events.

A reboot is necessary after doing the changes in the registry.