User's Manual

7
Congratulations on the purchase of a Sonim XP3.20™
mobile phone. This phone is a GSM/GPRS/EDGE enabled
handset with tri-band capabilities and has an intuitive,
feature-rich user interface, which allows you to make the
best use of the offered functions.
Phone Models Covered
This user guide covers two Sonim XP3.20™ phone
models: XP3.20-E and XP3.20-A. These two models
contain an identical scope of features and differ only in the
supported set of radio frequencies:
• Sonim XP3.20-E Quest Pro (GSM 900/1800/1900
MHz)
• Sonim XP3.20-A Quest Pro (GSM 850/1800/1900
MHz)
The model name can be read on the phone label under
the battery. In this User Guide, both models are referred
to as Sonim XP3.20, except for the few places where
information corresponding to a specific model (that is,
XP3.20-A or XP3.20-E) can be found.
Network Services
These are additional services that you can avail through
your network service provider. To make the best of these
services, you must subscribe to them through your service
provider and obtain instructions for their use from your
service provider.
Sonim Support Information
For additional product and support information,
visit
www.sonimtech.com.
Use the Guide Effectively
Familiarize yourself with the terminology and symbols used
in the guide to help you use your phone effectively.
HOME SCREEN This is the screen displayed
when the phone is in idle
condition.
PRESS Means to press and release a
key immediately. For example,
Press 2 means that you press
the key on the keypad that is
labelled with the numeral 2 and
the alphabets “ABC”.
SELECT Means to either press the
Left or Right Selection Key to
apply the command indicated
at the bottom of the screen.
The Center navigation key can
also be used to select options.
For example, if this guide says
Select Menu > Messages >
Create message, you must
press the Left Selection Key
to select Menu, scroll to
Messages and press the Left
Selection Key, scroll to Create
message and press the Left
Selection Key. To return to the
previous screen, press the Right
Selection Key.
General Information