User's Manual

44
Managing Connectivity
To set the data account, select Menu > Settings >
Connectivity > Data account and create a new data
account.
You can create, edit and delete the accounts. You can
edit the following information in the accounts: Account
name, APN, User name, Password and Authority type,
Primary DNS and Secondary DNS. Make the changes
and select OK. Then Add new packet data account will
pop up, select Yes.
Default data account Browser APN, MMS APN
and PTT cannot be edited or deleted.
Java Settings
To use the applications requiring internet service, the
Java must be set.
Select Menu > Settings > Connectivity > Java Settings.
Select the required data account and save.
USB Function
Phone can be connected to PC as a Mass storage
using USB cable. When the phone is connected to the
computer via a USB cable, the following two options are
displayed:
• Mass storage: Select this to use the USB cable as
mass storage device to transfer and synchronize
data between the Sonim XP5560 BOLT IS phone
and your computer.
• COM port: Select this to use the phone with
PC-Sync software.
When the phone is connected to the computer
via USB cable, you can select only to charge
the phone by pressing the Back button. You
need not select the Mass storage or COM port
option.
When the phone is connected to the computer
via USB cable in Mass Storage mode and the
memory card is also present in the phone,
the memory card and the phone memory
are displayed as two separate drives in the
computer.
When the phone is connected to the computer
as mass storage, you cannot access the My
les menu in the phone. To access the My
les menu, disconnect the phone from the
computer and reconnect in COM port mode.
When you are logged in to PTT, you cannot
access Mass storage as it will not be
recognized and the message “Currently not
available” will pop up.