Operating instructions

31
Stainless-steel insertion probe
0600 9999
0628 2232: accuracy: class A
Ex-Zones: 2, 1, 0
probe dimensions: >50mm x >4mm (w x ø)
sensor dimensions: >15 x >3mm (w x ø)
response time (99%): 10 Sec.
Drone Tankprobe
0600 9999
0628 2432: accuracy: class A
Ex-Zones: 2, 1, 0
probe dimensions: 235mm x 25mm (w x ø)
wight: 400g (without cable)
response time (99%): 10 Sec
cable: 1 ... 50 m
7.4.3 Calibration instructions
The plastic handle withstands a temperature of approx. 200°C for a short
time. A long-term maximum of 90°C is recommended.
Please take this into account when calibrating the system or individual
components.
8. Repair
Repairs are to be conducted by ecom instruments GmbH or by personnel
or service centres authorised by ecom instruments GmbH, because the
safety of the unit needs to be tested after repairs are implemented.
9. Cleaning maintenance and storage
- Only use a suitable cloth or sponge to clean the unit. Do not use any sol-
vents or abrasive cleaning agents when cleaning.
- It is recommended that you have the functionality and accuracy of the
unit inspected by the manufacturer every two years.
- The batteries should be removed from the unit during prolonged periods
of storage.
- Do not allow storage temperatures to exceed or fall below the permitted
range of -20°C to +70°C.