Users Manual
11
Battery Usage Guidelines
Battery Usage
ECOM Ex-Handy 10 phone comes with a built-in
battery. For any battery related queries contact ECOM
customer support.
WARNING
Use only ECOM certified charger and charging
cable with magnetic connector , to charge your
ECOM Ex-Handy 10.
Charging the Battery
The battery delivered with your feature phone is not
fully charged. We recommend to charge the phone
for five hours before using it for the first time. The full
capacity of the battery is reached after 3 to 4 complete
charge/discharge cycles.
There is a risk of explosion while charging if the
battery has been replaced by an incorrect type.
1. Insert Charger
Insert the charger plug into a power outlet.
2. Connect to Phone
The charging port is located in lower side of
the phone, below the back cover. Insert the
magnetic connector to the charging port, such
that the black arrow is positioned on the top of
the connector.
3. Charging Animation/Icon
If the battery is being charged when the phone
is switched o, a battery charging animation
with charged percentage is displayed.
If the battery is being charged while the phone
is switched on, the battery charge icon on the
home screen shows animation indicating that
the battery is being charged. After the phone
is fully charged the charging animation stops
and you can disconnect the charger from the
phone.
The LED indicator on the top right corner of
the phone, shows RED when the charging is
in progress and changes to GREEN once the
charging completes.
WARNING
DO NOT charge your ECOM Ex-Handy 10 inside
hazardous areas and/or with any other cable and
charger other than the provided ECOM certified
charging cable and charger.
Charging your ECOM Ex-Handy 10 with a dierent