V100 USER’S MANUAL Rugged Mobile Computing Solutions
June 2009 TRADEMARKS All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice.
ENERGY STAR® is a government program that offers businesses and consumers energy-efficient solutions, making it easy to save money while protecting the environment for future generations. Please reference ENERGY STAR® related information from www.energystar.gov. As an ENERGY STAR® Partner, MiTAC Technology Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
Over its lifetime, ENERGY STAR® qualified equipment in a single home office (e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years. Power management (“sleep settings”) on computers and monitors can result in much savings annually. Remember, saving energy prevents pollution Because most computer equipment is left on 24 hours a day, power management features are important for saving energy and are an easy way to reduce air pollution.
Table of Contents Chapter 1 Getting Started .............................................................1-1 Getting the Computer Running ............................................. 1-2 Unpacking ........................................................................... 1-2 Connecting to AC Power .................................................... 1-3 Opening and Closing the Cover ........................................ 1-4 Operating in Tablet Mode .................................................
Fn Key .................................................................................. 2-6 Hot Keys .............................................................................. 2-6 Using the Software Keyboard ................................................ 2-9 Using the Touchpad .............................................................. 2-10 Configuring the Touchpad............................................... 2-12 Using the Touchscreen (Optional) .......................................
Chapter 4 Expanding Your Computer ...........................................4-1 Connecting an External Monitor (Optional) ......................... 4-2 Connecting a Serial Device ..................................................... 4-4 Connecting a USB Device ....................................................... 4-5 Using Smart Cards (Optional) ................................................. 4-6 Inserting and Removing a Smart Card .............................. 4-6 Using PC Cards ....................
Chapter 8 Caring for the Computer ..............................................8-1 Protecting the Computer ....................................................... 8-2 Using an Anti-Virus Strategy ............................................. 8-2 Using the Cable Lock .......................................................... 8-3 Taking Care of the Computer ................................................ 8-4 Location Guidelines ............................................................
Appendix A Specifications ............................................................... A-1 Appendix B Regulatory Information ............................................... B-1 On the Use of the System ....................................................... B-2 Class B Regulations ............................................................. B-2 Safety Notices ..................................................................... B-3 On the Use of the RF Device ............................................
Chapter 1 Getting Started Congratulations on purchasing this rugged computer. This chapter first tells you step by step how to get the computer up and running. Then, you will find a section briefly introducing the external components of the computer.
Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items: Notebook computer Accessories: AC adapter AC power cord Grid-type hand strap Driver disc Stylus (option) Digitizer pen (option) Size “AAAA” battery (option) Inspect all the items. If any item is damaged or missing, notify your dealer immediately.
Connecting to AC Power The computer operates either on the external AC power or internal battery power. It is suggested that you use AC power when you start up the computer for the very first time. 1. Make sure that the computer is turned off. 2. Plug the DC cord of the AC adapter to the power connector of the computer (). 3. Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet (). 4.
Opening and Closing the Cover Open the top cover by pulling up on latch A and releasing latch B () and lifting up the cover (). You can tilt the cover forward or backward for optimal viewing clarity. Latch B Latch A Close the top cover by closing the display (). Then position latch B on the display side and bring latch A down () to fix the display in place.
Latch B Latch A
Operating in Tablet Mode In addition to being used as a regular notebook computer (Laptop mode), your computer can also be operated in Tablet mode. In Tablet mode, the computer can be operated using the touchscreen or active digitizer feature with the software keyboard (see chapter 2), and the tablet buttons (see later section on “Front Components”), instead of the internal keyboard and the touchpad. 1. Open the top cover so that it is almost perpendicular with the keyboard of the computer. 2.
2. Position the latch B on the display side, then bring latch A down () to fix the display in place. Latch B Latch A In Tablet mode, the computer can be operated while holding it as shown. To return to Laptop mode, perform the steps for changing the computer into Tablet mode in reverse order.
Turning On and Off the Computer Turning On 1. Make sure that the computer is connected to AC power. 2. Press the power button ( ). 3. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start. Turning Off To turn off the computer power, use the “Shut Down” command of your operating system.
Attaching the Hand Strap The hand strap can be attached to any two sides of the four (option) corners of your computer. Standard setup: two buckles on the left/right front side of your computer. To release, press on the right spring latch first to detach the right side. Then release the left side.
Optional setup: buckles on four corners of your computer.
Taking a Look at the Computer Front Components Ref Component Description Hand Strap Holder The hand strap can be attached to the two holders for convenient handling of your computer. OSD Control Button Toggles the OSD (On Screen Display) control panel ON and OFF. P1 Can be re-defined using the Button Manager utility. (See “Using Button Manager” in Chapter 7 for information.) Sunlightreadable Toggles the sunlight-readable function ON and OFF.
Ref Component Description RF Button Toggles the wireless LAN / Bluetooth® wireless / 3G power ON and OFF. P3 Can be re-defined using the Button Manager utility. (See “Using Button Manager” in Chapter 7 for information.) Reset Button Serves as the Ctrl+Alt+Del keyboard buttons. P4 Can be re-defined using the Button Manager utility. (See “Using Button Manager” in Chapter 7 for information.) Software Keyboard Button Shows or hides the software keyboard on your LCD display.
Rear Components Ref Component Description Hand Strap Holder The hand strap can be attached to the two holders for convenient handling of your computer. Audio Output Connector Connects a set of headphones, external speakers with amplifier, or an audio recording device. Microphone Connector Connects an external microphone. Kensington Lock Locks the computer to a stationary object for security. VGA Connector Connects an external display monitor.
Right-Side Components Ref Component Description Battery Pack Compartment Inside is the battery pack that supplies power to your computer when external power is not connected. Hard Disk Drive Compartment Inside is the hard disk drive. Left-Side Components Ref Component Description Power Connector Connects the AC adapter. USB Ports Each of the two ports connects a USB device, such as a flash disk, printer, digital camera, joystick, and more.
RJ-11 Connector Connects the telephone line. RJ-45 Connector Connects the LAN cable. ExpressCard Slot (upper) Accepts an ExpressCard for additional functions (option). PCMCIA Slot (lower) Accepts a PC card for additional functions. or PCMCIA Slot (upper) Accepts a PC card for additional functions. Smart Card Reader (lower) Accepts a smart card for additional security feature (option). Card Reader Accepts a SD (Secure Digital) card for removable storage media.
Bottom Components Ref Component Description Antenna Connector Inside is the connector for using an external antenna. Expansion Bus Connector Inside is the expansion bus connector for using a Port Replicator. Wireless LAN (WLAN) Card Slot Inside is the mini PCI-E slot for using a mini PCI-E WLAN card. Speaker Sends out sound and voice from your computer. Memory Slot Inside is the memory slot for expanding the memory size of your computer.
Top-open Components Ref Component Description Webcam Lens (option) Allows you to use your computer’s camera function. (Not shown in the illustration) WLAN Antenna Inside is the antenna for wireless LAN (local area network) transmission. WWAN 3G Antenna (option) Inside is the antenna for optional wireless WAN (wide area network) 3G transmission. LCD Screen Displays the output of the computer.
Ref Component Description Keyboard Serves as the data input device of the computer. Touchpad Serves as the pointing device of the computer. Indicators Show the current status of the computer’s devices. AC Power Battery Charge Lights green when the computer is turned on and using AC power. Lights green when the battery is fully charged. Lights yellow when the battery is being charged. Blinks yellow when the battery’s capacity is below 10%.
Chapter 2 Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your computer.
Starting and Stopping the Computer There are a number of ways to start and stop the computer. Starting the Computer You always start the computer using the power button. A computer starts up with an operating system (OS) existing on the storage device such as the hard disk. The computer will automatically load the OS after you turn it on. This process is called booting.
To stop in this mode... Do this... Standby/Sleep Depending on your settings in Windows, you can place the computer in Standby/Sleep mode by: Hibernation To start up or resume again Press any key. Closing the display cover Pressing the Fn+F10 hot key Pressing the power button Depending on your settings in Windows, you can place the computer in Hibernation mode by: Closing the display cover Pressing the power button Press the power button.
Using the Internal Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard plus an Fn key added for specific functions. The standard functions of the keyboard can be further divided into four major categories: Typewriter keys Cursor-control keys Numeric keys Function keys Typewriter Keys Typewriter keys are similar to the keys on a typewriter. Several keys are added such as the Ctrl, Alt, Esc, and lock keys for special purposes.
Cursor-Control Keys Numeric Keypad A 15-key numeric keypad is embedded in the typewriter keys as shown next:
Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. Fn Function Keys On the top row of the keys are the function keys: to . Function keys are multi-purpose keys that perform functions defined by individual programs. Fn Key The key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key.
Key Description Switches the wireless LAN radio on and off. NOTE: This function works only if an optional mini PCI-E wireless LAN card is installed. Decreases the sound volume. Increases the sound volume. Decreases the LCD brightness (20 levels). Increases the LCD brightness (20 levels). Switches the system sound output off (mute) and on. Switches LCD backlight on and off. Switches the display output when external devices are connected. NOTE: This function only applies to Plug & Play display devices.
To press the euro sign on a standard United States keyboard, hold down either of the Alt keys and type 0128 on the numeric keypad part of your keyboard. To press the euro sign on an UK keyboard, hold down the Alt Gr key and press 4 (which has an euro sign on it). Windows Keys The keyboard has two keys that perform Windows-specific functions: Windows Logo key and Application key.
Using the Software Keyboard When using the computer in Tablet mode, you can use the software keyboard. 1. Press the software keyboard button ( will appear onscreen. 2. Enter the characters with the stylus.
Using the Touchpad The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons. The touchpad consists of a rectangular pad (work surface) and a left and right buttons. To use the touchpad, place your forefinger or thumb on the pad. The rectangular pad acts like a miniature duplicate of your display.
Term Action Point Move your finger on the pad until the cursor points to the selection on the screen. Click Press and release the left button. –or– Tap gently anywhere on the pad. Double-click Press and release the left button twice in quick succession. –or– Tap twice on the pad rapidly. Drag and drop Press and hold the left button, then move your finger until you reach your destination (drag). Finally, release the button (drop) when you finish dragging your selection to the destination.
Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vice versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on. To configure the touchpad, go to Control Panel Hardware and Sounds Mouse Properties.
Using the Touchscreen (Optional) The touchscreen is a touch-sensitive device that allows you to easily use the computer without a mouse or touchpad to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.
Here are some common terms that you should know when using the touchscreen: Term Action Click/Point Tap gently on the touchscreen. Double-click Tap twice on the touchscreen rapidly. Drag and drop Press lightly on the touchscreen and move your finger until you reach your destination (drag). Finally, release your finger (drop) when you finish dragging your selection to the destination. The object will drop into the new location.
Using the Active Digitizer Feature (Optional) The active digitizer feature allows you to easily use the computer without a mouse, keyboard, or touchpad to communicate with the computer by using the optional digitizer pen.
When using the digitizer pen, be sure to install the included size “AAAA” battery. Here are some common terms that you should know when using the active digitizer feature: Term Action Move Move the cursor pointed by the digitizer pen. Click/Point Tap gently on the display. Double-click Tap twice on the display rapidly. Drag and drop Press lightly on the display and move your digitizer pen until you reach your destination (drag).
Using the Hard Disk Drive Your computer comes with a removable hard disk drive as drive C. A hard disk drive is a storage device with non-removable, rotating, magnetic storage platters inside it. It is where your operating system and application software programs are stored. Your hard disk drive is a 2.5-inch SATA (serial ATA) hard disk drive. This type of drive embodies the latest in fast, reliable mass storage by integrating all the control circuitry necessary for operation directly onto the drive itself.
Using OSD Control Panel The OSD Control Panel allows you to easily activate or operate certain functions on your computer. To use the OSD Control Panel: 1. Press the button on the front of your computer. 2. The following screen appears, providing several control buttons. For detailed descriptions of the Control Panel, click the 3. To close the Control Panel, either press the button again or click the button . button.
Using the Video Features The video subsystem of your computer features: 10.
operating system. See your operating system documentation or online help for specific information. For displaying in higher resolutions, you can connect an external monitor that supports higher resolutions. (See “Connecting an External Monitor” in Chapter 4 for more information.) Using Landscape or Portrait View After Windows is started up, you can rotate the display and perform the touchscreen and active digitizer operations in the rotated mode.
For a Model without 3G Module Primary Landscape Primary Portrait Secondary Landscape Display Secondary Portrait Display Display Primary Landscape Display Display For a Model with 3G Module Primary Landscape Primary Portrait Display Display Secondary Landscape Primary Landscape Display Display
Using the Audio Features The audio subsystem of your computer features: Built-in sound system for recording and playing sound on your computer Azalia interface (high density audio codec) Speaker (located on bottom side), and External audio connectors Ways of playing and recording sound vary with the operating system used. See your operating system documentation or online help for specific information.
Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices. Audio Output Connector ( ) can be connected to speakers, headphones, or earphone set. Microphone Connector ( ) can be connected to an external microphone for recording voice or sound.
Using G-Camera Lite G-Camera Lite allows you to take pictures with the Webcam, if supplied with your computer. To start G-Camera Lite, click Start All Programs G-Camera Lite G-Camera Lite. The camera control panel appears. Mode Current settings Setting buttons for different modes Click the Shutter button or press Enter to take photos. For detailed descriptions of G-Camera Lite, click the button .
Using the Communication Features Using the Modem The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board. To connect the telephone line to the modem, connect one end of the modem cable to the RJ-11 connector on the computer and the other end to the phone line.
Using the LAN The internal 10/100/1000Base-T LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 1000 Mbps. To connect the network cable to the LAN module, connect one end of the LAN cable to the RJ-45 connector on the computer and the other end to the network hub.
Using the Wireless LAN Depending on your model, an internal mini PCI-E wireless LAN (WLAN) card may have been pre-installed by your computer manufacturer at the factory. This card allows you to access corporate networks or the Internet in a wireless environment. The WLAN features include: Peer-to-Peer (Ad-Hoc) and Access Point (Infrastructure) modes support WEP (Wired Equivalent Privacy) 64/128-bit data encryption IEEE 802.
Installing the Mini PCI-E WLAN Card In case the mini PCI-E WLAN card has not been installed in your computer, perform the following: 1. Remove the battery pack (see chapter 3) and make sure that the computer is not connected to AC power. 2. Carefully place the computer upside down. 3. Remove the two screws and open the compartment cover. 4. To install the card, match the notched part of the card with the socket’s projected part, and firmly insert the card into the socket horizontally.
5. Secure with two screws. 6. Connect the antenna cable (see label for the correct one) to the “MAIN” and “AUX” antenna connectors on the card. 7. Close the compartment cover and secure with two screws. Turning Off/On the WLAN Radio Your computer has a built-in Fn+F2 WLAN hot key to switch the WLAN on/off. If you need to temporarily turn off the radio, press Fn+F2. To resume network connection, press Fn+F2 again.
It takes approximately 30 seconds for your computer to make a successful WLAN connection and approximately 10 seconds to disconnect. Connecting to a Wireless Network To connect to a wireless network: 1. Make sure that the WLAN radio is on (controlled by Fn+F2). 2. Click Start Programs Intel PROSet Wireless Intel PROSet Wireless. 3. If any wireless network is detected, the following window appears on screen. 4. Click to select a wireless network to connect to, and then click Connect. 5.
Using the Bluetooth Feature Depending on your model, your computer may incorporate the Bluetooth capability for short-range (about 10 meters) wireless communications between devices without requiring a cable connection. With Bluetooth, data can be transmitted through walls, pockets and briefcases as long as two devices are within range. By default, your computer’s Bluetooth feature is active (always ON) upon booting your computer and is in the general discoverable and pairable mode.
2. To search for Bluetooth devices, use any of the following three methods: Method 1: Right click the Bluetooth icon located in the system tray in the lower-right part of the screen. Select Explore Bluetooth Places. Method 2: located in the system tray in the Right click the Bluetooth icon lower-right part of the screen. Select Display Classic View. The Bluetooth utility screen appears. Right click the central icon (the yellow sun) and select Search Devices.
Method 3: Use Windows File Manager to browse to Bluetooth Places and select Search Devices. 3. Select the device you want to connect from the search results. 4. Depending on the type of Bluetooth device that you want to connect to, you will need to enter the pertinent information.
Using the GPS GPS (Global Positioning System) is a constellation of 24 well-spaced satellites that orbit the Earth and make it possible for devices enabled with GPS receivers to pinpoint their location. You need to install third-party GPS navigation software to take advantage of the GPS feature.
Chapter 3 Managing Power Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.
AC Adapter The AC adapter serves as a converter from AC (Alternating Current) to DC (Direct Current) power because your computer runs on DC power, but an electrical outlet usually provides AC power. It also charges the battery pack when connected to AC power. The adapter operates on any voltage in the range of 100~240 V AC.
Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time. Charging the Battery Pack To charge the battery pack, connect the AC adapter to the computer and an electrical outlet.
Checking the Battery Level By Operating System You can check the approximate battery level using the battery meter function of the operating system. To read the battery level in Windows, click the battery icon on the system tray. By Gas Gauge On the exterior side of the battery pack is a gas gauge for displaying the estimated battery charge.
The value of the corresponding green segment indicates the relative percentage of the battery charge. The battery pack is fully discharged when you see no segment glowing green. Replacing the Battery Pack If you often rely on battery power for a long period of time while traveling, you may consider the purchase of an additional battery pack from your dealer and keep it with you in a fully charged state as a backup. To replace the battery pack, follow these steps: 1.
4. Pull on the ribbon strip to remove the battery pack. 5. Slide the new battery pack all the way into the slot. Make sure to observe the correct orientation (the ribbon strip must face outward for future battery back removal). 6. Close the compartment cover to secure the battery pack.
Battery Low Signals and Actions When the battery is low, Windows gives warning messages and the Battery ) blinks yellow to alert you. Charge Indicator ( Immediately save your data upon Battery Low. The remaining operating time depends on how you are using the computer. If you are using the audio subsystem, PC card, hard or USB flash disk, the battery might run out of charge very quickly.
Power Management Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows, power supply to different computer components is controlled on an as-needed basis. This allows maximum power conservation and performance at the same time. In general, Windows’ power management works in this way: What...
Hibernation Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the computer can be turned off. When you use the hibernation feature, you do not have to close the applications. The computer stores the state of your computer to a file on the hard disk and then shuts down.
Power-Saving Tips Aside from enabling your computer’s power saving mode (see previous section), you can do your part to maximize the battery’s operating time by following these suggestions. Do not disable Power Management. Decrease the LCD brightness to the lowest comfortable level. Shorten the length of time before Windows turn off the display. Many USB devices use power just by being connected. If you use a USB mouse, you can save power by disconnecting the mouse and using the touchpad.
Chapter 4 Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter.
Connecting an External Monitor (Optional) If you want the benefits of a larger display screen with higher resolution, you can connect an external display monitor to your computer. Follow this procedure to connect an external monitor: 1. Make sure that the computer is not turned on. 2. Plug the monitor’s D-type signal connector to the computer’s VGA connector. 3. Plug one end of the monitor’s power cord into the power socket on the monitor and the other end to an electrical outlet. 4.
Connecting a Serial Device Your computer has one or two serial port (depending on model) for connecting a serial device such as a serial mouse or serial communication device (modem). Follow this procedure to connect a serial device: 1. Make sure the computer is not turned on 2. Plug the device cable to the serial port on the rear of the computer. 3. Turn on the computer.
Connecting a USB Device Your computer has two USB ports for connecting USB devices, such as a digital camera, scanner, printer, modem, and mouse. The USB ports support transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices. To connect a USB device, simply plug the device cable to one of the USB ports.
Using Smart Cards (Optional) Your computer may have a smart card slot for additional security feature, providing tamper-proof storage of user and account identity. A smart card is a type of plastic card embedded with a computer chip that stores and transacts data between you (user) and the computer. You need to install third-party smart card software to take advantage of the smart card feature. Inserting and Removing a Smart Card To insert a smart card: 1. Locate the smart card slot. 2.
To remove a smart card: 1. Make sure that the third-party smart card software is not accessing the smart card. 2. Pull the card out of the slot.
Using PC Cards Your computer has one or two PC card slots that support CardBus specifications. The slots can accommodate a type II card. Typical type II cards are flash memory, SRAM, modem, LAN, and SCSI cards. Inserting and Removing a PC Card To insert a PC card: 1. Locate the PC card slot on the left side of the computer. 2. Slide the PC card, with its label facing up, into the slot until the eject button pops out.
3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove a PC card: 1. Double-click on the Safely Remove Hardware icon ( for Windows Vista or for Windows XP) found on the Windows system tray and the Safely Remove Hardware window appears on screen. 2. Select (highlight) the PC card from the list to disable the card. 3. Push the eject button and the card will slide out slightly. 4.
Using ExpressCards (Optional) Your computer may have an ExpressCard slot. ExpressCard supports the PCI Express and USB 2.0 serial data interfaces (supporting speeds of up to 2.5 Gbps and 480 Mbps respectively), improving speed in data transfer while conserving power usage. ExpressCard Type The ExpressCard slot can accommodate a 54 mm (ExpressCard/54) or 34 mm (ExpressCard/34) wide ExpressCard.
Inserting and Removing an ExpressCard To insert an ExpressCard: 1. Locate the ExpressCard slot on the left side of the computer. 2. Slide the ExpressCard, with its label facing up, all the way into the slot until the rear connectors click into place. Eject button 3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove an ExpressCard: 1.
Using the Card Reader Your computer has a Card Reader. The Card Reader is a small drive for reading from and writing to removable storage cards (or called memory cards). The Card Reader supports Secure Digital (SD) cards. To insert a storage card: 1. Locate the Card Reader slot on the left side of the computer. 2. Align the card with its connector pointing to the slot and its label facing up. Slide the card into the slot until it reaches the end. 3.
To remove a storage card: 1. Double-click My Computer. 2. Right-click the drive with the card and select Eject. 3. Pull the card out of the slot.
Using the Port Replicator (Optional) A port replicator is available as an option. This device eliminates the hassles of having you connect and disconnect the various cables when carrying your computer around and allows a variety of peripherals to be connected including a headphone or microphone, etc. The port replicator connects to the expansion bus connector at the bottom of your computer. 1. Slide open the expansion bus connector cover.
2. Connect your port replicator to the expansion bus connector. For more detailed information, refer to the Operating Instructions of the port replicator.
System Memory Upgrade You can upgrade your computer by changing system memory to a maximum of 4 GB on the DDR2 SO-DIMM slot. To install the RAM module: 1. Remove the battery pack (see chapter 3) and make sure that the computer is not connected to AC power. 2. Carefully place the notebook computer upside down. 3. Remove the two screws to open the compartment cover.
4. To install the RAM module, match the module's notched part with the socket's projected part and firmly insert the module into the socket at a 20-degree angle. Then push down until the retaining clips lock the module into position. 5. Close the compartment cover and secure with two screws.
Chapter 5 Using BIOS Setup and System Recovery BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand. The BIOS settings are needed by your computer to identify the types of installed devices and establish special features.
BIOS Setup When to Use You need to run BIOS Setup Utility when: You see an error message on the screen requesting you to run BIOS Setup Utility. You want to restore the factory default BIOS settings. You want to modify some specific settings according to the hardware . You want to modify some specific settings to optimize the system performance. How to Use Starting BIOS Setup To run BIOS Setup Utility, press the F2 key when the prompt appears on the screen during the system startup.
Main Advanced Security Boot Exit Model: V100 SATA Port 1 [FUJITSU MHV2080BH-(PM)80026MB System Time: System Date: [16:33:08] 16 [01/12/2009] Processor Info: Intel(R)Core(TM)2 Duo CPU U9400@1.40GHz Installed System Memory: 1024 MB System BIOS Version: KBC/EC BIOS Version: R1.01 R1.
Key Function , Selects a menu title. , Selects an item or option. +/– Changes the value. Enter 1) Brings up the sub-menu when available. 2) Opens or closes the option window when an item is selected. Esc 1) Exits BIOS Setup Utility. 2) Closes the option window if one is open. F1 Provides help information. F9 Loads setup defaults. F10 Saves and exit the BIOS Setup Utility.
Main Menu The Main menu contains the system date and time settings as well as shows the basic configuration of the system. Main Advanced Security Boot Exit Model: V100 SATA Port 1 [FUJITSU MHV2080BH-(PM)80026MB System Time: System Date: [16:33:08] 16 [01/12/2009] Processor Info: Intel(R)Core(TM)2 Duo CPU U9400@1.40GHz Installed System Memory: 1024 MB System BIOS Version: KBC/EC BIOS Version: R1.01 R1.
Advanced Menu The Advanced menu contains the advanced settings as shown next. Main Advanced Security Boot SATA Mode Selection: [AHCI] AHCI Digitizer Type: Serial port COM1: Serial port COM2: Serial port COM4: [AIP1040] [Enabled] [Enabled] [Enabled] Boot-time Diagnostic Screen: [Disabled] F1 Help Esc Exit ↑↓ Select Item ←→ Select Menu Exit Item Specific Help Determines how SATA controller(s) operate. NOTE: Turbo memory function need to enable SATA AHCI mode.
Security Menu The Security menu contains the security settings, which safeguard your system against unauthorized use.
Password on Boot allows you to enable or disable the entering of password for booting up your system. Once the password is successfully set and this item is enabled, it is required for booting up the system. TPM Support enables or disables TPM (Trusted Platform Module) support.
Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. Main Advanced Security Boot Exit Boot priority order: 1: USB FDC: 2: SATA HDD: 3: USB KEY: 4: USB CDROM: 5: USB HDD: 6: PCI BEV: IBA GE Slot 00C8 v1300 7: 8: Excluded from boor order: : Other USB: : PCI: : UNKNOWN: F1 Help Esc Exit ↑↓ Select Item ←→ Select Menu Item Specific Help Keys used to view or configure devices: Up and Down arrows select a device. <+> and <-> moves the device up or down.
Exit Menu The Exit menu displays ways of exiting BIOS Setup Utility. After finishing with your settings, you must save and exit so that the changes can take effect. Main Advanced Security Boot Exit Item Specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes F1 Help Esc Exit ↑↓ Select Item ←→ Select Menu Exit System Setup and save your changes to CMOS.
System Recovery Use System Recovery when: Your computer does not start correctly. Your Windows operating system does not start at all. You want to restore the factory default Windows settings. To run System Recovery: 1. During system startup when the following screen appears, press Ctrl + Alt + F2 keys for four seconds. 2. The message This will help you reinstall Windows to the whole HDD to factory default.
to ask if you want to access System Recovery. Type 1 to continue or type 0 to exit. 3. A warning message appears as follows: **************************************** You must accept the following terms before performing the recovery process: 1. The recovery software is solely the purpose of reinstalling or restoring software associated with the hard disk of this operating GETAC machine. 2. Except the above, no other use is granted hereunder.
5. After the recovery process has been completed successfully, the GSI (GETAC Smart Installer) screen is displayed at the first boot-up of Windows operating system. 6. GSI will automatically perform system hardware detection and driver installation. After GSI has completed the whole process successfully, system will reboot.
Chapter 6 Installing Software Drivers and Utilities To take full advantage of the unique features of your computer, drivers and utilities must be installed. If you purchased the computer with Windows pre-installed, your dealer may have already installed the drivers and utilities. If not, you need to install them using the disc supplied with your computer. This chapter describes how to install the drivers and utilities.
How to Use the Driver Disc An autorun program is provided on the driver disc to help you easily install the drivers. As you insert the disc, the autorun program automatically starts. If you need to start the program manually, run the Autorun.exe program from the driver disc. When the following screen appears select Windows XP or Windows Vista based on the operating system installed.
Manual Allows you to view the Operation Manual on screen. Adobe Reader Browse CD Browses the contents of the driver disc. Exit Exits the driver installation.
Installation for Windows XP After selecting the operating system Windows XP, the main screen appears as shown next: To install the necessary driver, just click on the particular option and follow the onscreen instructions to continue and complete installation. Driver on the First Page Device Driver Ensures the full function of the following drivers. Install this main driver before installing the other drivers. Upon clicking this button the chipset driver would be installed.
LAN Installs the LAN driver that allows you to use the network function. Touch Screen Allows you to use your fingers (or optional touchscreen pen) as a pointing device on the LCD screen (refer to the “Using the Touchscreen Utility” section for further information). Digitizer Allows you to use your digitizer pen (option) as a pointing device on the digitizer screen. TPM Allows you to install the driver and application for using the TPM (Trusted Platform Module) support for security.
PC Card Controller Allows you to use the PC card reader to access an optional PCMCIA card. GPS Upon clicking on this, the instructions for installing the GPS driver appears. GPS Filter Install this driver after installing the above driver to complete GPS driver installation. Bluetooth Allows you to install the Bluetooth driver and application program that allows you to use the Bluetooth feature. Refer to chapter 2 for detailed instructions on using the Bluetooth feature of your computer.
Vehicle Dock Upon clicking on this, the following screen appears: Video Capture Allows you to install the video capture driver. USB-to-COM Allows you to install the USB-to-COM driver. MiTAC BIOS Service Allows the interoperability between system BIOS and the utilities installed in your computer. G-Manager Allows you to install the G-Manager utility that manages and configures various system resources.
Installation for Windows Vista After selecting the operating system Windows Vista, the main screen appears as shown next: To install the necessary driver, just click on the particular option and follow the onscreen instructions to continue and complete installation. Driver on the First Page Device Driver Ensures the full function of the following drivers. Install this main driver before installing the other drivers. Upon clicking this button the chipset driver would be installed.
LAN Installs the LAN driver that allows you to use the network function. Turbo Memory Installs the Turbo Memory driver that allows you to boost system performance. PC Card Controller Allows you to use the PC card reader to access an optional PCMCIA card. Driver on the Second Page Upon clicking on Next Page, the following screen appears.
TPM Allows you to install the driver and application for using the TPM (Trusted Platform Module) support for security. GPS Upon clicking on this, the instructions for installing the GPS driver appears. GPS Filter Install this driver after installing the above driver to complete GPS driver installation. WCDMA Install this driver for using the 3G feature. Driver on the Third Page Upon clicking on Next Page, the following screen appears.
instructions on using the Bluetooth feature of your computer. Vehicle Dock Upon clicking on this, the following screen appears: Video Capture Allows you to install the video capture driver. USB-to-COM Allows you to install the USB-to-COM driver. MiTAC BIOS Service Allows the interoperability between system BIOS and the utilities installed in your computer. G-Manager Allows you to install the G-Manager utility that manages and configures various system resources.
Using the Touchscreen Utility After installing the touchscreen driver/utility, you can use PenMount Monitor to configure your touchsreen. located on the system tray 1. Right-click the PenMount Monitor icon and click Control Panel to bring up the PenMount Control Panel. 2. Select PenMount 9000 RS232 then click Configure.
3. Click Standard Calibration. Standard Calibration lets you match the touch screen to your display so that the point you touch is accurately tracked on screen. Standard calibration only requires four points for calibration and one point for confirmation. Under normal circumstances Standard Calibration is all you need to perform an accurate calibration.
4. Click the red square on the screen to calibrate your touchscreen for use on the computer.
5. Click Advanced Calibration (if needed). Advanced Calibration improves the accuracy of calibration by using more involved engineering calculations. Use this function only if you have tried the Standard Calibration and there is still a discrepancy in the way the touchscreen maps to the display. You can choose 4, 9, 16 or 25 points to calibrate, though we suggest that you first try 9 points, if it is still not tracking well then try 16 or 25 points.
6. If your Windows’ Graphics Controller setting is “Extended Desktop” and Primary Device is “Monitor,” click the Multiple Monitors folder and select the Multiple Monitor Support option. 7. Click Map Touch Screens. 8. Then click OK to exit the PenMount Control Panel.
Chapter 7 Using Management Utilities Utilities are provided to manage system resources and components.
Using G-Manager G-Manager is a unified user interface utility that allows you to manage and configure the following: System Battery ECO (economy mode) Light Sensor Ignition Monitoring GPS Status To start up G-Manager, do one of the following: Click Start All Programs GETAC Utility, or Right-click on the GETAC Utility icon ( click G-Manager. The screen as shown next appears.
For detailed descriptions of G-Manager, click .
Using Button Manager The five quick buttons located on the front of your computer come with predefined functions. You can use Button Manager to re-define the buttons. 1. Click Start Programs Button Manager Button Manager. The following screen appears. 2. Select the button to re-define. 3. Under the Update Button Function click the Key Name dropdown list to select a new button function.
4. Repeat the steps for the other buttons that you want to re-define. 5. Click Save to save your configurations. 6. Click Start Flash to start the flash process, the percentage of flash process will be shown. 7. Click Load the next time you use Button Manager to load any previously saved configurations.
Chapter 8 Caring for the Computer Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering areas such as protecting, storing, cleaning, and traveling.
Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using an Anti-Virus Strategy You can install a virus-detecting program to monitor potential viruses that could damage your files.
Using the Cable Lock You can use a Kensington-type cable lock to protect your computer against theft. The cable lock is available in most computer stores. To use the lock, loop the lock cable around a stationary object such as a table. Insert the lock to the Kensington lock hole and turn the key to secure the lock. Store the key in a safe place.
Taking Care of the Computer Location Guidelines For optimal performance, use the computer where the recommended temperature is between 0C (32F) and 55C (131F) – actual operating temperature depending on product specifications. Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust. Do not cover or block any ventilation openings on the computer.
a screen saver or other software that prevents the power management from working. Cleaning Guidelines Never clean the computer with its power on. Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer. Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display. Dust or grease on the touchpad can affect its sensitivity. Clean the pad by using adhesive tape to remove the dust and grease on its surface.
It is recommended that you do not charge the battery pack more than once a day. It is recommended that you charge the battery pack with the computer’s power off. To maintain the battery pack’s operating efficiency, store it in a cool dark place removed from the computer and with 30% ~ 40% charge remaining. Important guidelines when using the battery pack.
To remove hard to remove dirt, blow some steam on the particular area and gently wipe away using a soft cloth. Turn off the computer power when cleaning the display. Cleaning the display with the power on may cause improper operation. Use the touchscreen within the intended area only. The display area and touchscreen operating area is the same. Using it beyond the allowed area may cause damage to the display and result in improper operation. Do not use excessive force on the display.
When Traveling Before traveling with your computer, make a backup of your hard disk data into flash disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure that the battery pack is fully charged. Make sure that the computer is turned off and the top cover is securely closed. Do not leave objects in between the keyboard and closed display. Disconnect the AC adapter from the computer and take it with you.
Chapter 9 Troubleshooting Computer problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems.
Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the computer is causing the problem. Make sure that you turn on all peripheral devices before turning on the computer. If an external device has a problem, make sure that the cable connections are correct and secure. Make sure that the configuration information is properly set in the BIOS Setup program.
Solving Common Problems Battery Problems The battery does not charge (Battery Charge indicator does not light yellow). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature. Make sure that the battery pack is installed correctly. Make sure that the battery terminals are clean. The operating time of a fully charged battery becomes shorter.
Make sure that the distance between the two devices are not over 10 meters or that there are no walls or other obstructions between the devices. Make sure that the other device is not in “Hidden” mode. Make sure that both devices are compatible. Display Problems Nothing appears on the screen. During operation, the screen may automatically turn off as a result of power management. Press any key to see if the screen comes back. The brightness level might be too low.
Simultaneous display/multi-display does not work. Make sure that you turn on the external monitor before turning on the computer. Press the Fn+F9 hot key to toggle through the display options or change the settings in Display Properties in Windows. Hardware Device Problems The computer does not recognize a newly installed device. The device may not be correctly configured in the BIOS Setup program. Run the BIOS Setup program to identify the new type.
Keyboard, Mouse, and Touchpad Problems The keyboard does not respond. Try connecting an external keyboard. If it works, contact an authorized dealer, as the internal keyboard cable might be loose. The numeric keypad is disabled. Make sure that the Num Lock is switched on. (Check if the Num Lock glows or not.) Indicator The external keyboard does not work. Make sure that the keyboard cable is properly connected. The USB mouse does not work. Make sure that the mouse cable is properly connected.
Make sure that the necessary driver(s) is correctly installed. Make sure that the WLAN feature is turned on. Transmission quality is poor. Your computer may be in an out-of-range situation. Move your computer closer to the Access Point or another WLAN device it is associated with. Check if there is high interference around the environment and solve the problem as described next. Radio interference exists.
Make sure that your computer is configured with the same security option (encryption) to the Access Point. Use the Web Manager/Telnet of the Access Point to check whether it is connected to the network. Reconfigure and reset the Access Point. I cannot access the network. Make sure that the necessary driver(s) is correctly installed. Make sure that the network configuration is appropriate. Make sure that the user name or password is correct.
The PC card stops communicating properly. The application may have been reset when the computer is turned off or in Standby mode. Exit and restart the application. Power Management Problems The computer does not enter Standby or Hibernation mode automatically. If you have a connection to another computer, the computer does not enter Standby or Hibernation mode if the connection is actively in use. Make sure that the Standby or Hibernation time-out is enabled.
Make sure that the software is correctly installed. If an error message appears on the screen, consult the software program’s documentation for further information. If you are sure the operation has stop, reset the computer. (See “Resetting the Computer” later in this chapter.) Sound Problems No sound is produced. Make sure that the volume control is not set too low. Make sure that the audio driver is correctly installed. Make sure that the computer is not in Standby mode.
Startup Problems When you turn on the computer, it does not respond and the Power Indicator does not light green. If you are using an external AC power, make sure that the AC adapter is correctly and securely connected. If so, make sure that the electrical outlet works properly. If you are using the battery power, make sure that the battery is not discharged. When you turn on the computer, it stops after POST. Restart your computer. Other Problems The date/time is incorrect.
Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If the computer operation seems to hang up, first wait. It is possible that the computer is processing data. Periodically check the hard disk drive in-use indicator, if it flashes irregularly, the program may be accessing data and preventing you from using the keyboard.
Appendix A Specifications Parts CPU Memory Chipset Intel SU9400 Core 2 Duo ULV 1.4 GHz processor 800 MHz FSB (Front Side Bus), Thermal specifications 10 W RAM (system) Up to 4 GB, 200-pin × 1, DDR2 SO-DIMM, 1.25-inch high Cache ICH9M (small form factor) Turbo (option) 4 GB NorthBridge 3 MB L2 cache SouthBridge ICH9M (small form factor) BIOS Display Audio Specifications ® 4 MB EEPROM, system and VGA BIOS, G-sensor support, Plug-and-Play, ACPI 2.
Parts Specifications Keyboard Standard keys with numeric pad keys, 12 function keys, special Fn (Function) key and Windows keys Water-proof and dust-proof membrane, large character printing, water-proof rubber (option) Pointing device Glide touchpad with 2 buttons, capacitance-type Hard disk drive SATA interface, 5400 rpm support, 9.5 mm height 2.
Parts Specifications Dimension (L× W× H) 289.68× 227.77× 59.4 mm (11.4× 8.97× 2.3 inch) Weight Less than 2.5 kg (5.
Appendix B Regulatory Information This appendix provides regulatory statements and safety notices on your computer.
On the Use of the System Class B Regulations USA Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur.
FINNISH VAROITUS: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan valmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. ENGLISH CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. DEUTSCH VORSICHT: Explosionsgefahr bei unsachgemäß em Austausch der Batterie.
paper or other objects that will reduce cooling. Do not use the AC adapter while it is inside a carrying case. Connect the adapter to a proper power source. The voltage requirements are found on the product case and/or packaging. Do not use the adapter if the cord becomes damaged. Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture.
On the Use of the RF Device USA and Canada Safety Requirements and Notices IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Antenna use: In order to comply with FCC RF exposure limits, low gain integrated antennas should be located at a minimum distance of 20 cm (8 inches) or more from the body of all persons.
EMC Requirements This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with the limits for a Class B digital device pursuant to Part 15 subpart C of the FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
Canada Radio Frequency Interference Requirements To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé à l'intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal.
Greek To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 1999/5/EC. Icelandic Þessi vara stenst reglugerð Evró pska Efnahags Bandalagsins nú mer 1999/5/EC. Italian Questo prodotto è conforme alla Direttiva Europea 1999/5/EC. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC. Portuguese Este produto cumpre com as normas da Diretiva Européia 1999/5/EC. Spanish Este producto cumple con las normas del Directivo Europeo 1999/5/EC.
General European standards dictate maximum radiated transmit power of 100 mW Effective Isotropic Radiated Power (EIRP) and the frequency range 2400 – 2483.5 MHz. Belgium and the Netherlands In Belgium and the Netherlands, the product may not be used outdoors. See the instructions next under the heading “Turning Off the Wireless LAN Radio.
Departments in Which the Wireless LAN Module’s Maximum EIRP Not Shown in the Previous Table Frequency Ranges (MHz) Indoors Outdoors 2400 – 2446.5 10 mW Not permitted 2446.5 – 2483.5 100 mW 100 mW on private property with Ministry of Defense approval Turning Off the Wireless LAN Radio NOTE: Turning the wireless LAN radio off is not the same as disabling the wireless LAN card. It is not necessary to disable the card to meet the regulatory requirements.
