Operation Manual

 Make sure that your computer is configured with the same security
option (encryption) to the Access Point.
 Use the Web Manager/Telnet of the Access Point to check whether it is
connected to the network.
 Reconfigure and reset the Access Point.
I cannot access the network.
 Make sure that the necessary driver(s) is correctly installed.
 Make sure that the network configuration is appropriate.
 Make sure that the user name or password is correct.
 You have moved out of range of the network.
 Turn off power management.
Modem Problems
The modem does not work.
 Make sure that the modem driver is correctly installed.
 Make sure that the telephone line is properly connected.
 Make sure that the COM port in the communication software is correctly
set.
 Turn off power management.
PC Card Problems
The PC card does not work.
 Make sure that the PC card controller driver is correctly installed.
 Make sure that the PC card is correctly seated.
 If the card requires an IRQ (Interrupt ReQuest), make sure that there is
one available.