Operation Manual

It takes approximately 30 seconds for your computer to make a successful
WLAN connection and approximately 10 seconds to disconnect.
Connecting to a Wireless Network
To connect to a wireless network:
1. Make sure that the WLAN radio is on (controlled by Fn+F2).
2. Click Start  Programs  Intel PROSet Wireless  Intel PROSet
Wireless.
3. If any wireless network is detected, the following window appears on
screen.
4. Click to select a wireless network to connect to, and then click Connect.
5. Depending on the settings, you may be asked to enter a wireless security
password (encryption key).
For more information on the Intel PROSet Wireless utility, click Help? in the
Intel(R) PROSet/Wireless window.