Operation Manual

13
Battery Usage Guidelines
Battery Usage
The ECOM Smart-Ex 201 phone comes with a built-in
battery. For any battery related queries contact Sonim
customer support.
Use only the ECOM Smart-Ex 201 certied battery
that is designed for this phone model.
The use of other batteries may void the warranty
terms of your phone and cause damage.
It is recommended to protect the battery from
extreme temperature environments and moisture.
Please keep the battery out of the reach of children.
WARNING
ONLY use the USB Data Cable PC S201 with your
ECOM SMART-EX 201.
Charging the Battery
The battery delivered with your mobile phone is not fully
charged. We recommend that you charge your mobile for
4 hours before you use your mobile phone for the rst
time.
There is a risk of explosion while charging if the
battery has been replaced by an incorrect type.
1 Insert Charger
Insert the charger plug into a power outlet
2 Connect to Phone
The charging port is located in lower side
of the phone, below the back cover. Insert
the charger connector to the charging
port.
3 Charging Animation/Icon
If the battery is being charged when the
phone is switched off, a battery charging
animation with charged percentage is
displayed.
If the battery is being charged while the
phone is switched on, the battery charge
icon on the home screen shows animation
indicating that the battery is being
charged. After the phone is fully charged
the charging animation stops and you can
disconnect the charger from the phone.
WARNING
DO NOT charge your ECOM Smart-EX 201 inside
hazardous areas and/or with anything other than the
provided USB Data Cable PC S201.
Charging your ECOM Smart-EX 201 with a different
cable/Charger and/or in a hazardous environment will