Quick Start Guide

WIFI Pairing to eWeLink App:
• Install, setup account and login to eWeLink App
• The Valve Icon is the WIFI Pairing Button
• Blue LED is WIFI Status, Slow Single Blink, pause, not paired, not broadcasting
• Blink, blink, blink, pause, repeat, ready to be paired (Quick Pairing mode)
• 2.4GHz Network required & Smart Phone should be connected to this 2.4GHz
Network
• If not in pairing mode, hold Valve Icon button for approx.. 4 seconds to set to
pairing mode
• On smart phone, in eWeLink App, use “+” and following instructions for “Quick
Pairing”
• App. should acknowledge successful pairing in 20-90 seconds
• Rename the Bulldog valve appropriately, “Water Main”, other?
• In the device settings menu (select device, 3 dot settings menu), update
“Power-on State” to “Last state”
• In device settings, turn on “Push Notifications” to receive notice of valve open
or closed. (On/Off)
• In device settings, update “Current Version”, if required
LED Status
Steady Slow Blink
3 Blink, Pause
Solid On
Solid Off
Blue LED
Not WIFI Paired
Waiting to be
paired
WIFI Paired
Red LED, Valve
Icon
Valve Open
Valve Closed
Green LED
(Speaker)
Green, System Armed
or
Red – in alarm state
Speaker Beeping