3/8'' STANDARD WASHER 3/8'' LOCK WASHER 3/8''-16 x 2''LONG SOCKET HEX HEAD BOLT 1 REQUIRED Assembly instructions for K29 SHEET 1 OF 4
1/4''-20 x 1/2''LONG PAN CROSS HEAD SCREW 2 REQUIRED FOR THIS STEP (LEAVE THESE SCREWS LOOSE FOR EASE OF ASSEMBLY) NOTE: BALL STOPS NOT SHOWN FOR CLARITY. THEY MUST FACE UP.
1/4'' -20 x 1/4''LONG SOCKET HEAD SET SCREW 2 REQUIRED FOR THIS STEP (LEAVE THESE SCREWS LOOSE FOR EASE OF ASSEMBLY) Assembly instructions for K29 SHEET 3 OF 4
TIGHTEN ALL SCREWS TO FIX RACK COMPONENTS INTO PLACE.
