Installation Guide

ManualsBrandsEconoco ManualsCloset Organizers22 in. W x 70 in. H Adjustable Double Bar Metal Clothes Rack

ALLEN KEY

HOLES FACE INSIDE

SIDE FRAME

LEVELERS

50mm LONG M10

SCREW, WASHER,

AND LOCK WASHER

5/16"-18 x .5"

HEX HEAD CAP

SCREW

LOWER

CROSS BAR

ENDS

LOWER CROSS

BAR CENTER

LOWER CROSS BAR

3/8" SPRING

LOCK WASHER

3/8"

WASHER

3/8-16 x 2" LONG

HEX HEAD CAP

SCREW

LEVELERS

UPPER CROSS BAR

MALE

UPPER CROSS BAR

FEMALE

UPPER CROSS BAR

ASSEMBLY

INSTRUCTIONS FOR:

K40

ASSEMBLE TWO SIDE FRAMES WITH

•

THE ASSEMBLED CROSS BARS.

IF THEY'RE NOT ALREADY INSTALLED,

•

SCREW IN THE LEVELERS TO THE

SIDE FRAMES.

INCLUDED HARDWARE

5/16"

WASHER

5/16" SPRING

LOCK WASHER

ASSEMBLE THE UPPER AND

LOWER CROSS BARS BY

DEPRESSING THE PUSH

BUTTONS AND JOINING THE

COMPONENTS AS SHOWN.

SHEET 1 OF 2

K40

Summary of content (2 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS FOR: K40 1 UPPER CROSS BAR FEMALE UPPER CROSS BAR MALE ER P UP AR SB S RO C ASSEMBLE THE UPPER AND LOWER CROSS BARS BY DEPRESSING THE PUSH BUTTONS AND JOINING THE COMPONENTS AS SHOWN. LOWER CROSS BAR CENTER LOWER CROSS BAR ENDS K40 4x 3/8-16 x 2" LONG HEX HEAD CAP SCREW HOLES FACE INSIDE E AM ALLEN KEY R EF LEVELERS 4x 2 3/8" SPRING LOCK WASHER 4x 3/8" WASHER 4x 5/16" SPRING LOCK WASHER 4x 5/16" WASHER 4x 5/16"-18 x .
PAGE 2
3 4 x2 1/2" LONG 5/16" SCREW, WASHER, AND LOCK WASHER • • • • K40 ASSEMBLE THE HANG BAR BY DEPRESSING THE PUSH BUTTONS ON THE MALE HALF AND INSTALL IT INTO THE FEMALE HALF. SLIDE HANG BAR UPRIGHTS IN PLACE. SECURE WITH HARDWARE AS SHOWN. REPEAT FOR SECOND HANG BAR. DEPRESS PUSH BUTTONS AND INSTALL HANG BARS ONTO THE UNIT.