Installation Guide

TOP PORTION

OF PIPE

ADJUSTABILITY

MECHANISM

QTY. 2

SET SCREW

STEP 1

PSBBADJ

IS ALREADY ASSEMBLED:

LOOSEN THE TOP HAND WHEELS, AND REMOVE TOP PORTION OF PIPE.

•

LOOSEN SET SCREWS ON ADJUSTABILITY MECHANISM, THEN

•

UNSCREW THE ADJUSTABILITY MECHANISM FROM THE UNIT

PSAOH ASSEMBLY INSTRUCTIONS

PAGE 1

PAGE 1
PSAOH ASSEMBLY INSTRUCTIONS TOP PORTION OF PIPE SET SCREW ADJUSTABILITY MECHANISM QTY. 2 STEP 1 IF PSBBADJ IS ALREADY ASSEMBLED: • LOOSEN THE TOP HAND WHEELS, AND REMOVE TOP PORTION OF PIPE.
PAGE 2
HANG BAR (1'' PIPE) ADJUSTABLE PIPE FITTING 1 (WITH THREADED HOLE) ADJUSTABLE PIPE FITTING 2 (WITH SLEEVE) ADJUSTABLE PIPE FITTING 1 (WITH THREADED HOLE) PSAOH ADJUSTABLE PIPE FITTING 2 (WITH UNTHREADED SLEEVE) STEP 2 • • SCREW THE 1" PIPE ONTO ADJUSTABLE PIPE FITTING 1. SLIDE ADJUSTABLE PIPE FITTING 2 ONTO UNTHREADED END OF 1" PIPE.
PAGE 3
STEP 3 WITH ONE PERSON ON EACH SIDE, SLIDE THE PSAOH ONTO THE LOWER UPRIGHTS OF THE PSBBADJ. ADJUST TO DESIRED HEIGHT AND TIGHTEN WITH THE HAND WHEELS.