Installation Guide

WRENCH
LOWER
UPRIGHT
BASE
HANDWHEEL
WASHER
LOCK
WASHER
SCREW
BASE
FEET
SMALL
UPRIGHTS
UPPER FRAME
D
CLEARANCE
HOLE
STEM
ASSEMBLY INSTRUCTIONS:
PSRD36
INCLUDED TOOLS
- SECURE EACH LOWER UPRIGHT TO THE
BASE WITH A SCREW, LOCK WASHER,
AND WASHER AS SHOWN.
- NOTE:
ADJUSTABLE HANDWHEELS
SHOULD BE FACING OUTWARD.
- THREAD THE CASTERS INTO THE BASE
FEET AND TIGHTEN WITH WRENCH.
- THREAD THE SMALL UPRIGHTS
INTO THE UPPER FRAME.
- TIGHTEN EACH UPRIGHT AS
MUCH AS POSSIBLE.
- LOOSEN THE HANDWHEELS AND INSERT THE
ASSEMBLY FROM THE PREVIOUS STEP INTO
THE UPRIGHTS FROM STEP 1.
- NOTE:
AN ASSISTANT MAY BE REQUIRED TO
HELP ALIGN ALL 4 UPRIGHTS.
- INSTALL THE ROUND HANG RAIL AS SHOWN.
SHEET 1 OF 1 PSRD36
2
31