User manual

To Remove:
Rear Lint Screen
follow steps 1 - 5
Purifier Plate
follow steps 1 - 6
RCI cell
follow steps 1 - 10
5
4
3
1
2
REMOVING THE REAR LINT SCREEN
1. Unplug unit.
2. Remove
the back
cover
screw.
3. Remove
back cover.
Press the
sides to
unlatch,
then tilt the
bottom out
to remove.
4. Remove
two
thumbscrews
securing the
top of the lint
screen.
5. Remove
the lint
screen by
pulling
back the
top, then
lifting up
and out.
WARNING: Do not operate
Fresh Air by EcoQuest without
the rear lint screen and back
cover properly installed.
9
9. Remove
two (2)
thumbscrews.
10
10. Slide the RCI
cell down and
out of unit.
REMOVING THE PURIFIER PLATE & RCI CELL
6
6. To remove the
purification
plate, grasp
edge of plate in
the center and
gently pull out.
NOTE: If the
plate is difficult
to remove, gently
press down on
the lower metal
contact tab.
7
7. Unlock the
RCI cell
connector
by pressing
on the
connector’s
locking tabs.
8
8. Pull the
connector
straight out
to unplug.
8 9